GWS

LATEST ACTIVITY

• Posted in thread: Lennox A/C condensor fan motor on 12-01-2007 at 01:31 PM
  Thanks for all the help. So far today it's been working OK. Keeping my fingers crossed.Thanks
  againGWS

• Posted in thread: Lennox A/C condensor fan motor on 11-30-2007 at 08:04 AM
  I checkrd transformer it seems to be OK. I was looking at outside unit this am. I used a wooden
  dowl rod and pushed the contact points together and the compressor and fan came on and ran
  until I relea...

• Posted in thread: Lennox A/C condensor fan motor on 11-29-2007 at 07:15 AM
  Welcome GWS:The problem may be the capicitor on the motor. It would be a 1' X 3"~ piece on the
  motor housing or off to the side. It changes the wave pattern and boosts the power for the
  start. To test...

• Posted in thread: Lennox A/C condensor fan motor on 11-29-2007 at 07:10 AM
  Hi Glenn, I put in new condensor fan motor and new capacitor the fan came on, but it only ran
  for about an hour and shut off again. The inside fan blows cold air through the hous but the
  outside conde...

• Posted in thread: Lennox A/C condensor fan motor on 11-21-2007 at 10:25 AM
  Thank you Glenn I will try that

• Posted in thread: Lennox A/C condensor fan motor on 11-14-2007 at 05:39 PM
  I am new to forum. I have a Lennox model # HS26-036-2P whole house A/C unit. The fan motor in
  the outside condensor, (Emerson motor Part # 65G6001) will only run if I give the fan blade a
  little push ...