Last Activity:06-13-2010 10:38 PM
Posted in thread: Cracks in header on 06-14-2010 at 12:08 PM
There are 2 jack studs at each end. I nailed through the king stud into the ends of the header.
I am now wondering if I used too many nails to assemble the header because the cracking seems
to follow ...
Posted in thread: Cracks in header on 06-13-2010 at 10:22 PM
I built a header to install into a bearing wall so I could create a pass through in the wall.
My header is a sandwich of 2 - 6ft sections of 2" x 12" with 1/2" plywood glued and nailed
between them. I...