Last Activity:06-19-2006 8:41 PM
Posted in thread: Non-producing Ice Maker on 06-14-2006 at 10:15 PM
We installed a new Kenmore fridge (freezer on top) at our cabin a little over a year ago. We
leave the ice maker arm in the 'up' position unless we're in residence, which is 8 - 10
weekends annually. ...
Posted in thread: newby with questions on 04-20-2006 at 09:07 PM
Tom, Thanks for the input. Clearly I need to give this some consideration, and while I like to
do things myself, I may be forced to hire out the digging since the ground in that area is a
force to be ...
Posted in thread: Hi all, Tile guy from Michigan on 04-20-2006 at 05:21 AM
jaz, thanks for the helpful info. my concern stemmed from the fact in some areas of grout,
water beads nicely, but absorbs in other areas, even though it was all the same batch of grout.
certainly i c...
Posted in thread: Hi all, Tile guy from Michigan on 04-19-2006 at 07:54 PM
for my first ever tile project, i tiled a kitchen countertop with ceramic 12" tile, sanded
grout. then, out of broken ceramic tile, i covered the backsplash that runs up to a 10 ft
ceiling with a free...
Posted in thread: newby with questions on 04-19-2006 at 05:13 AM
hi, i'm new to this and all sites, and am so pleased to come across this wealth of knowledge!
greatly enjoy diy projects - a lot of enthusiasm, limited experience, less technical knowledge.
- Fire Safety
- One Word Game
- Aggressive Deer
- Driveway Resurfacing
- Attaching wood post to concrete slab
- Lennox A/C isn't cooling
- Suggestions on how to repair
- Eliminating Drywall Ceiling In Attached Garage
- Garage door opener just barks at me!
- Crumbling, 'spaling' exterior foundation walls
- Getting rid of mosquitos
- Possible mold problems??
- drylocking basement and removing mold on concrete
- Your house is how old?
- backyard improvements