Last Activity:10-21-2010 4:04 AM
Posted in thread: oil hot water problem on 10-20-2010 at 04:47 PM
i have a oil hot water heater and for some reason it quites every couple days. hit the reset
button and works fine for a couple more days. any ideas
Posted in thread: hooking a wood furnace to a oil furnace on 09-29-2008 at 07:23 AM
it is a good furnace csa aproved and all that stuff.when i bought my house it have a wood
furnace beside my oil furnace. i replaced my oil with a new one and left the wood still hooked
up to the duct ...
Posted in thread: hooking a wood furnace to a oil furnace on 09-27-2008 at 11:31 AM
I am adding a wood furnace to my oil furnace can someone trll me how to wire it up so it works
off my oil furnace blower?
Posted in thread: double switch on 04-13-2008 at 05:02 AM
thanks for all the help. did what square eye said and it worked fine. white was hot
Posted in thread: double switch on 04-12-2008 at 04:32 AM
ok. i no it is a double switch with two switch lever, a three way switch has only one switch
lever.now one lever turns on a ceiling light in the back room and the other lever turns on a
Posted in thread: double switch on 04-11-2008 at 03:44 PM
it is not a three way switch. a three way switch would have 2 switches for one light would it
Posted in thread: double switch on 04-11-2008 at 02:10 PM
can some one try to explaine this to me. i have a double switch i am trying to change it to two
single ones problem is in side the box there are only three wires red, black, and white. red is
on top l...
Posted in thread: quick question on 02-07-2008 at 09:01 AM
i am going to run new wire to a bedroom that has knob and tubing now. it is going to have at
least 6 plugins. there is only one right now. u can never have enough. so there will be a
computer and just...
Posted in thread: quick question on 02-07-2008 at 08:32 AM
how many pulg-in can u have on one 15amp breaker with 14/2 wire?
Posted in thread: insulating old home on 01-30-2008 at 02:55 AM
thank u for your help any ideas why they put boards on the inside of the wall. i have worked on
old homes before and usually the laths are right on the 2x4 studs
- Suggestions on how to repair
- One Word Game
- Aggressive Deer
- Lennox A/C isn't cooling
- Garage door opener just barks at me!
- Crumbling, 'spaling' exterior foundation walls
- Fire Safety
- Getting rid of mosquitos
- Possible mold problems??
- drylocking basement and removing mold on concrete
- Your house is how old?
- Eliminating Drywall Ceiling In Attached Garage
- backyard improvements
- Dishwasher not draining completely
- Musky smelling rugs