jayrod

LATEST ACTIVITY

• Posted in thread: Best way to make a "roof" over second floor outside balcony/deck on 04-29-2013 at 08:30 AM
  Sounds like good info. Thanks!

• Posted in thread: Best way to make a "roof" over second floor outside balcony/deck on 04-28-2013 at 02:49 PM
  Hey guys. I am trying to figure out the best way to make a roof over our 2nd floor balcony/deck
  to keep rain out from the area underneath. Should I take the deck boards up and start over? Or
  put somet...

• Posted in thread: Cant figure this out! Not getting 24v at the board or thermostat on 03-09-2013 at 07:59 PM
  I'll still try that real quick

• Posted in thread: Cant figure this out! Not getting 24v at the board or thermostat on 03-09-2013 at 07:58 PM
  Transformer doesnt work because I tried it on the working unit, and then that unit didnt work.
  No 24V. So either the Transformer was sold to me bad or I blew it.

• Posted in thread: Cant figure this out! Not getting 24v at the board or thermostat on 03-09-2013 at 06:17 PM
  I'm pretty sure you've lost a leg of power on the 240V circuit and your meter is reading the
  backfeed from the remaining leg.That would make the transformer short out or go bad or whatever
  happened? B...

• Posted in thread: Cant figure this out! Not getting 24v at the board or thermostat on 03-09-2013 at 02:45 PM
  If I measure across XformT1 and any of the wires on the front of the heat sequencer I get 240v
  as well.

• Posted in thread: Cant figure this out! Not getting 24v at the board or thermostat on 03-09-2013 at 02:43 PM
  Yellow is connected to Y2. The green one is hanging loose because I tried to jump it with R way
  earlier. I never tried the transformer from my working unit in this unit for fear of shorting
  it out and...

• Posted in thread: Cant figure this out! Not getting 24v at the board or thermostat on 03-09-2013 at 07:22 AM
  Sorry for the late reply It didnt notify me by email like it was and I thought you guys gave up
  on me. I should be fine working on it. I have fixed it numerous times over the years but this
  time Im no...

• Posted in thread: Cant figure this out! Not getting 24v at the board or thermostat on 03-06-2013 at 07:15 PM
  The metal box has a quick disconnect thats not fused. It says "disconnect not fused" right on
  it. Its 240 volts outside and inside on the air handler. I measured the main wires going into
  the handler ...

• Posted in thread: Cant figure this out! Not getting 24v at the board or thermostat on 03-06-2013 at 11:46 AM
  Should T2 and/or L2 have any voltage when its not turned on?