VIEW MY

JDB

Gift Premium Subscription To JDB

Join Date:

06-23-2011

Last Activity:

06-15-2012 12:18 PM

  • Lancaster
  • PA

LATEST ACTIVITY

  • Posted in thread: Cleaning up Mold Between Floors on 06-15-2012 at 10:32 AM
    Thanks again! I've been hacking away at things trying to be as safe as possible.I'm actually
    thrilled to be finding mold -- now I know where it is and can get rid of it. I've been using a
    cartridge ty...

  • Posted in thread: Ceiling Repair on 06-15-2012 at 10:30 AM
    O.k. - so it's basically material and not labor then! Thanks so much, I appreciate the
    response.This is a plaster ceiling. Maybe mesh isn't the right word -- there's some kind of
    wire structure betwee...

  • Posted in thread: Cleaning up Mold Between Floors on 06-14-2012 at 02:36 PM
    Thanks for this. That makes a lot of sense.The toilet job was DIY, we didn't think to open up a
    hole in the ceiling.I've got one now, with the dehumidifier on underneath.Should I let that run
    for a bi...

  • Posted in thread: Ceiling Repair on 06-14-2012 at 02:10 PM
    This may be a completely inappropriate question for a DIY forum, but I'll ask anyway! (It's in
    the context of a DIY project at least).I've cut into my ceiling in search of mold. I think I've
    found som...

  • Posted in thread: Cleaning up Mold Between Floors on 06-14-2012 at 01:52 PM
    About 9 months ago, my wife and I replaced a toilet that had a broken wax ring. We got some
    water leaking down to the ceiling on the first floor. Now I'm having what seem to be mold
    symptoms -- I get ...

  • Posted in thread: Does this need fixing? on 06-24-2011 at 04:49 AM
    Thanks for the feedback! Just to be 100% clear, we should ask them to path the holes but can
    safely ignore the mortar being uneven?

  • Posted in thread: Does this need fixing? on 06-23-2011 at 03:55 AM
    Hello,We recently got some spot pointing done on our place. We noticed a few places where the
    mortar was uneven, I've attached a photo. Is this a problem? We're not sure if we should try to
    fix this o...

0 COMMENTS
POST A COMMENT