Last Activity:08-19-2014 11:13 PM
Likes Given: 1
23 Likes on 20 Posts
Posted in thread: Glasstop range burner problem on 08-19-2014 at 10:12 PM
Jeff 1, Nope. I thought it was an easy thing to remember, but took this picture after just in
case. The red wire on the right hand side and the brown top center are the ones in question of
Posted in thread: Glasstop range burner problem on 08-19-2014 at 07:00 AM
Hi,Didn't take a picture before you pulled off the wires?Wire diagram missing from the
range?Range, make, model#?Part# you ordered?jeff.
Posted in thread: GE drop in stove electronic module replacement on 08-17-2014 at 07:05 AM
Is this a glass cooktop only or a full stove? Full stove, but a drop in style.jeff.
Posted in thread: GE drop in stove electronic module replacement on 08-09-2014 at 09:58 PM
Look here, scroll down to the Oven Control Board and you'll find a video link for replacing
it.Wrong kind of range.The video even uses a Whirlpool range for replacing a GE clock
Posted in thread: GE drop in stove electronic module replacement on 08-09-2014 at 12:58 PM
Hi,This control is starting to come up as NLA :( clock control kitGE doesn't put manuals
online....I couldn't find much for your model#... like, power off, lift cooktop and then
clock/control cover ...
Posted in thread: Water dripping on the floor from inside the on 08-01-2014 at 08:57 PM
Thankx for the update :)jeff.
Posted in thread: Water dripping on the floor from inside the on 07-23-2014 at 08:53 PM
Hi,Where is the water, exactly?Ice inside also?If you have ice on the freezer floor, defrost
drain is likely restricted or clogged and the defrost water is leaking inside and running out
the door onto...
Posted in thread: Servicing Info for Portable AC on 07-21-2014 at 09:53 PM
Hi,It's not cooling but I'm thinking it just needs coolantHope not, that means there is a leak
in the refrigeration system.No model# posted :(jeff.
Posted in thread: Magic Chef Freezer not cooling on 07-02-2014 at 04:47 PM
Hi,Make, model#?Is that poping sound a possible clicking noise??See if the compressor is
clicking on and off?jeff.
Posted in thread: Intermittent issues with Filling of Kenmore Washer on 06-26-2014 at 07:40 AM
Just wanted to say thank you guys, the new inlet valve seems to have fixed the problem. Much
appreciated!Thankx for the update :)jeff.