Last Activity:12-28-2013 8:48 AM
Posted in thread: Replacing ballcock assembly on 12-27-2013 at 05:06 PM
Hi Guys,I was at my aunts house today and noticed that the ballcock assmebly is leaking at the
top. If I replace the assembly does the float and float arm have to be replaced also? or can I
use the ol...
Posted in thread: Storing lawnmower on 10-14-2013 at 05:06 PM
Cheers Mike,I guess I should have mentioned that but yeah its a craftsman push mower. So I
should just run it dead and put it away? As far as weedeaters thats what I do is run them dry
and make a new ...
Posted in thread: Storing lawnmower on 10-14-2013 at 03:40 PM
Hi GuysAs the fall is moving along here and grass slowing down I got to thinking about the best
way to store my lawnmower for the winter. I ask now as I got a new one at the beginning of the
year and ...
Posted in thread: Gas Furnace question on 09-14-2013 at 04:22 AM
Thanks Neal,Yeah I'm going to give them a call Monday morning. I tried using the furnace when I
just got up here and same thing the gas would fire then stop and restart ( did it twice
actually). I gue...
Posted in thread: Gas Furnace question on 09-13-2013 at 02:00 PM
I had the company that installed my furnace come over today as they recommend every two years
having it cleaned and next month would be two years. Well they came and did the job I guess the
flame rod ...
Posted in thread: Laundry tub tap repair question on 08-14-2013 at 07:05 AM
Thanks Joe, I might have to get a bigger adjustable wrench as the one I have only goes to 1"
and the nut is slightly bigger.
Posted in thread: Laundry tub tap repair question on 08-14-2013 at 06:47 AM
Thanks neal,another question, sorry. What size wrench would I need to get that nut off with? I
don't have a wrench big enough to get that off with, even a adjustable one. I do have chanel
lock that ar...
Posted in thread: Laundry tub tap repair question on 08-14-2013 at 06:20 AM
Thanks Neal, so after removing the handle there will be a nut? or do you mean the nut that is
painted to the right of the arrow has to come off too to get to the packing washers?
Posted in thread: Laundry tub tap repair question on 08-13-2013 at 03:38 PM
Hi Guys,I have noticed that I have been getting some leaking around the handle on the hot water
side when using both the cold water and hot water taps. I have attached a pic with a arrow as
to where i...
Posted in thread: Shower problem on 06-15-2013 at 01:27 PM
Hi Guys,Today I noticed that around were my shower head where it connects to the pipe was
dripping a bit. I removed the head and noticed that around the threads on the pipe it had
corroded slightly. I...