- Posts 9
Last Activity:07-06-2010 8:12 PM
Posted in thread: Attic ventilation on 06-27-2010 at 04:19 AM
first off - clear all of the insulation from the sofits - that way the atic can get air - if
not you will cut the life span of your roof plus spend more to cool your house - also get the
Posted in thread: Cleaned Stainless Steel with green scouring pad. on 06-27-2010 at 03:48 AM
use wet sandpaper on the pan - also work well on SS sinks
Posted in thread: Water Leak In Poured Basement Wall on 06-27-2010 at 03:29 AM
go to Xypex Corporationi have used this product in the past - there is nothing like itlook for
Patch'n Plug on the products pageby the way - you can fix this leak from the inside of the
basement - cut...
Posted in thread: fireplace suggestions please on 06-21-2010 at 12:50 PM
The license tag on the back wall could be worth a few dollars - you should check with a company
that sells gas logs
Posted in thread: Bees drilling holes and making themselves at home. on 06-21-2010 at 12:30 PM
the bees will not eat the wood if it has been treated with a clear silicone sealer - that is if
the house is unpainted - is your house is natural cedar ? if so here is the solution the first
thing to ...
Posted in thread: Raised concrete porch on 06-21-2010 at 04:49 AM
you are going to spend a lot of money to redo the brick and cement - here is an idea - remove
the porch and replace it with a deck using treated wood and trex for the top - or if you wanted
to go with...
Posted in thread: Casement-Pic-Casement on 11-30-2007 at 02:43 AM
i installed one several years ago - the window was around $ 1100. before labor - you may also
want to use vinyl replacement windows with center dividers - screw them all together - save
Posted in thread: Help!! i destroyed my door jam. on 11-30-2007 at 02:35 AM
you will need to measure the size of the jamb - go to lowes or depot - they have door jamb kits
in the millwork section - if this is a newer door - you should have no problem - just remove
the trim on...
Posted in thread: Building cement steps on 02-20-2006 at 01:38 AM
always use re-bar - it would be best to pour a footing for it also.