Last Activity:12-11-2013 12:28 PM
Likes Given: 4
9 Likes on 7 Posts
Posted in thread: Setting fence posts on 12-09-2013 at 06:28 PM
Posted in thread: Setting fence posts on 12-09-2013 at 02:10 PM
My son has a fence guy going to his house to put up wooden privacy fence. We have had rain on
and off for the last week or more. Is it smart to dig post holes and set them when the ground
is this wet ...
Posted in thread: Finishing a cutting board on 11-16-2013 at 09:26 PM
ThAnks a lot
Posted in thread: Best way to cut 45 degree end joints on 10-19-2013 at 09:42 AM
I'd use a chop saw or a circular saw with the lines marked with a speed square. If all else
fails, you can go old-school and use a simple miter box.Thanks. I use my chop saw for
everything and was won...
Posted in thread: Best way to cut 45 degree end joints on 10-18-2013 at 07:48 PM
Am going to make some small boxes that I want to miter the ends. I would love to know what
everyone thinks the best way to do that is?
Posted in thread: Door on 09-06-2013 at 11:11 AM
I have a metal exterior door that has almost full length glass there is also a vinyl piece that
screws on the door and it has the horizontal and vertical pieces that make up the panes of
glass. My que...
Posted in thread: What does this mean? on 09-06-2013 at 09:45 AM
Thanks and yes it's from lowes
Posted in thread: Rust on table saw top on 09-06-2013 at 08:23 AM
This is all great information guys thanks. I now have both table a d band saw covered. I used
some fine steel wool but haven't sprayed anything in it yet. After the steel wool I am left
with the spots...
Posted in thread: Victorian porch brakets on 09-04-2013 at 10:28 PM
I am looking for Victorian style PVC porch brackets. Any leads where I can find them?
Posted in thread: Rust on table saw top on 09-04-2013 at 09:04 PM
remove it with steel wool. clean the entire surface with Brakeleen & rub a light layer paraffin
wax on the entire surface.Thanks will try that