VIEW MY

jmdoggett

Gift Premium Subscription To jmdoggett

Join Date:

07-15-2013

Last Activity:

07-30-2013 1:36 PM

2 Likes on 2 Posts 

    ABOUT ME

  • Photography Videography
  • Software Engineer / Author
  • Jay Doggett
  • Male
  • http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Dstripbooks&field-keywords=Jay%20Doggett
  • NH

LATEST ACTIVITY

  • Posted in thread: Bathroom Sink Drain Conumdrum on 07-29-2013 at 08:04 AM
    I performed the tasks I talked about. Cutting off the top of the brass tube going to the floor
    was challenging because it's close to the wall. My tube cutter would not go all the way around.
    I improvi...

  • Posted in thread: Bathroom Sink Drain Conumdrum on 07-18-2013 at 07:01 AM
    I re examined the PVC bits I have and realized I can cut the top off of the brass tube going to
    the floor, slide a PVC compression nut and rubber washer over it and attach the P-Trap to that.
    In theor...

  • Posted in thread: Bathroom Sink Drain Conumdrum on 07-17-2013 at 07:25 AM
    The bathroom is on the second floor. I could tear into the floor, but I really don't want to do
    that.

  • Posted in thread: Bathroom Sink Drain Conumdrum on 07-15-2013 at 09:38 AM
    Thanks for answering me.It is 1-1/4 chromed brass going down into something I can't see well,
    but it appears to be the same or very close to the same below. I can't tell if it's galvanized
    or lead. it...

  • Posted in thread: Bathroom Sink Drain Conumdrum on 07-15-2013 at 07:33 AM
    Hello everyone. This is my first post. I have a bit of a dilemma and I hope some of you
    experienced knowledgeable folks can advise me.Over the weekend the brass trap under my bathroom
    sink crumbled ap...

0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS