VIEW MY

jobeppo

Gift Premium Subscription To jobeppo

Join Date:

01-16-2012

Last Activity:

01-17-2013 6:52 PM

1 Likes on 1 Posts 

LATEST ACTIVITY

  • Posted in thread: Kenmore dishwasher removal on 01-13-2013 at 07:24 PM
    got it out / and the new one in !!! Thank you very much for the help !

  • Posted in thread: frigidare washer question on 01-11-2013 at 05:17 PM
    Maybe. Since you say that..i would think if it is bad its in the mode..thinking the tubs full
    if water..stuck open or closed. I did just receive the manual so i can check that too. Thanks

  • Posted in thread: Kenmore dishwasher removal on 01-11-2013 at 04:47 PM
    Going to remove the old dishwasher tonight. New one coming tomorrow..Never have before...any
    tips or things i should know? Thank you

  • Posted in thread: frigidare washer question on 01-11-2013 at 04:09 PM
    Water not going into the washer all of a sudden. Water appears to be coming all the way up to
    it though..any ideas?Thank you

  • Posted in thread: Dishwasher Leaking? on 11-16-2012 at 10:48 AM
    Hi, Thank you all for your replies of support... Well its a Sears Kenmore Model 363.14074790,I
    opened up the kick plate and gave the dishwasher a start up and was able to see the leaking. I
    have attac...

  • Posted in thread: Dishwasher Leaking? on 11-12-2012 at 09:54 AM
    Just noticed leaking in the basement and i am 80% sure its the dish washer ..any idea where i
    can start? I assume by 1st pulling out of its cubby under the cabinet.Thanks much!Joe D.

  • Posted in thread: Kenmore 70 Series washer on 01-18-2012 at 07:59 PM
    Hi, Sorry for the delay....Crazy few days ! Anyway...I did buy a kit for this washer and it did
    not fix the problem...not getting what the deal is... The Modle of my Kenmore 70 Series is
    110.20702990....

  • Posted in thread: Kenmore 70 Series washer on 01-17-2012 at 04:57 AM
    I will send along a model number.Hard to explain this one. The top part of the agitator comes
    apart and there is another housing part inside which has the cams in it. This part snaps onto 2
    plastic ta...

  • Posted in thread: Kenmore 70 Series washer on 01-16-2012 at 11:10 AM
    My agitator keeps popping off and i continually have to pop it back in.Seems to clip in fairly
    good but obviously not. I think it may be the slipperyness from the soaps or a design flaw. I
    bought the ...

0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS