Last Activity:12-13-2009 1:54 AM
Posted in thread: 20 Amp circuit goes to 12 guage wire that 14! on 12-02-2009 at 10:22 PM
Why not fix it now? Are you going to get a better opportunity than during a remodel? Do it for
Posted in thread: Electrical problem on 12-01-2009 at 12:27 AM
If your 240V outlets work correctly but your 120V outlets don't you should be taking a good
look at the neutral conductor which serves the shop panel.
Posted in thread: Breaker panel install on 11-29-2009 at 01:55 AM
Keep your cables separated. If you bundle them you are not allowed to pull the full capacity of
current through them.
Posted in thread: Electrical problem on 11-29-2009 at 01:49 AM
Undersized wire to the shop could result in the compressor seeing less voltage than it needs.
What is the distance between circuit breaker and outlet, and what gauge wire between them? If
the answer i...
Posted in thread: MDF baseboard, curved wall on 06-19-2009 at 11:02 PM
Thanks for the help. I won't get it wet and I'll avoid scoring the back unless all else fails.
I suspect the Aussie stuff has some kind of flexible surface bonded to it.My new plan is to do
it over se...
Posted in thread: MDF baseboard, curved wall on 06-18-2009 at 10:08 PM
Apparently this is MDF. Is there a special technique to bending it?1292
Posted in thread: MDF baseboard, curved wall on 06-18-2009 at 05:33 PM
I want to put MDF baseboard on the "inside" of a curved wall. Radius is about 8 or 9 foot. Can
I do it without the stuff breaking? Any tips / tricks? Score the back? Wet it like drywall? I
do not want...
- Lawnmower Question
- Size of intake vent?
- Need some help
- Hall Way Door - Is this load bearing?
- One Word Game
- Hallway header options where door is
- Carrier AC Outside Fan Will Not Turn ON
- Granite Installed - Possible Issue?
- Install Quarter Round when there is large gap underneath the baseboard?
- Req opinions on professionally completed drain repair.
- Pavers in an enclosed patio
- Driveway Resurfacing
- Shower faucet leaking when shower is on and replacing stem does not help
- Kitchen flooring
- sheetrock and plaster question