Last Activity:06-03-2012 2:45 AM
Posted in thread: How is the best way to paint our interior doors? on 07-15-2012 at 01:05 AM
Depending on the number of doors...3-4 brush or foam roller...more...spray. Are these "flush"
(flat) or paneled? Either way I take my orbital sander w/220 grit and quickly run over all flat
Posted in thread: Broken kitchen cabinet(s) on 05-19-2012 at 05:52 PM
This is what you're looking for.. made by USFutaba. You need a right and left set for each
drawer. Just 2 screws and the just snap together. The little phillips thing that looks like a
screw is to ta...
Posted in thread: Room doors in apartments, what are they made of? on 05-19-2012 at 05:10 PM
Forget trying to replace the "door skin"... just measure it and call your lumber yard, big box
in a pinch, and replace it. the center of the door is pieces of corrugated cardboard glued
between the "s...
Posted in thread: Mysterious lost water pressure on 09-10-2011 at 02:18 AM
If the "cartridge wasn't in there water would be gushing all over. Please try and post a
picture so I can see what you're talking about.Try again
Posted in thread: Advice on circular saw please on 09-09-2011 at 02:11 AM
I don't use my circular saw every day but this is the blade that I have been the most happy
with. 7-1/4 in. x 24 Tooth Carbide Circular Saw Blade-D0724R at The Home Depot It has a very
thin kerf and j...
Posted in thread: Cabinet Fastening on 09-09-2011 at 02:00 AM
Only a small part of Canada is French speaking...mostly around Quebec.
Posted in thread: Building custom-fit cabinets - any tips? on 09-09-2011 at 01:56 AM
Not sure what you mean by "...leaves me no choice but to replace some or all of the cabinet's
original wood." Here is a site that is a perfect fit for cabinet fronts. Kreg Tool Company |
Kreg Jigs, De...
Posted in thread: Mysterious lost water pressure on 09-09-2011 at 01:18 AM
What do you mean by "faucet"? The tub spout? The entire valve? The cartridge? If you removed
the "spout" and there's plenty of pressure and water try a different spout. Pictures would help
a lot to un...
Posted in thread: bath tub has rust around drain on 09-09-2011 at 01:05 AM
The best way to tackle this is to remove the drain and then do your "brush, sand, and
touch-up". If you don't remove the drain there is still rust under it that will migrate back
into view. Apply a nu...
Posted in thread: Painting Textured MH Drywall on 09-08-2011 at 10:14 AM
I can't understand why the primer would peel. I've used Zinsser Bullseye and "Cover Stain"
primers for years and have never had it peel. And their customer service has always been great
(for me anyway...
- One Word Game
- Best way to get rid of dandelions from the yard
- Aggressive Deer
- Excel Workbook
- Bad block foundation options
- Possible mold problems??
- Installing new garbage disposal
- question about water from central a/c
- deck roof and gutter question
- A little help with hardware, please?
- Suggestions on how to repair
- Crumbling, 'spaling' exterior foundation walls
- pressure washer advice
- Toilet will not fill