JUNEBUG 88

LATEST ACTIVITY

• Posted in thread: Converting bedroom into handicap access bathroom,need wall insulation? on 09-07-2012 at 11:16 PM
  For purposes of my decreasing mobility we have to convert one of our bedrooms into a bathroom
  with no sill shower and hydro therapy tub. We will be ripping out the carpeting and walls to
  replace them ...

• Posted in thread: Wood heat is great but extreme low humidity-ECM motor? on 09-07-2012 at 10:43 PM
  We are praying for a full recovery for him, it is no fun being out of commission I have been
  since 1996 with 3 back surgeries and now partially paralyzed and in need of a power wheelchair.
  But since I...

• Posted in thread: Wood heat is great but extreme low humidity-ECM motor? on 09-05-2012 at 10:19 PM
  Furnace installers I have talked to just want to install a new furnace which I do NOT want nor
  need. I turn on the furnace for a few weekends per winter season. They do NOT answer my
  questions either ...

• Posted in thread: Wood heat is great but extreme low humidity-ECM motor? on 08-31-2012 at 10:21 PM
  Any replies???

• Posted in thread: Wood heat is great but extreme low humidity-ECM motor? on 08-28-2012 at 11:41 PM
  Yes I want to use furnace motor to distribute the humidity throughout the house, at lower speed
  than what is running now. The high speed is not saving us on electric bills in winter. Which
  furnace mou...

• Posted in thread: Wood heat is great but extreme low humidity-ECM motor? on 08-28-2012 at 11:37 PM
  ECM motor may or may not be worth the cost for what you intend to use the furnace for. IT seems
  you are just using the furnace motor to distribute humidity from the new furnace mounted
  humidifier? Do ...

• Posted in thread: Wood heat is great but extreme low humidity-ECM motor? on 08-22-2012 at 11:10 PM
  Update on fireplace; It is rated very efficient at 90%. I believe it! So far the most wood we
  burned during winter was about 2.5 cords of hardwood. Our family owns the forest of trees we
  just cut,spli...

• Posted in thread: Slate Hearth on 02-13-2009 at 12:05 AM
  The fireplace has been finally installed and it passed inspection despite all the problems
  occurring during install. Inspector approved my ideas for the hearth and Marble surround. I
  plan to use Hi te...

• Posted in thread: Slate Hearth on 02-06-2009 at 12:08 PM
  Permits are all approved

• Posted in thread: Slate Hearth on 02-06-2009 at 12:08 PM
  Slate is smooth on bottom and slightly textured on top. The carpeting will be cut back and the
  base will be screwed into the floor and floor joists in numerous areas, it will not move. I am
  also gluin...