Last Activity:10-10-2013 12:10 PM
Likes Given: 4
11 Likes on 9 Posts
Posted in thread: Raise high the roof beam on 10-10-2013 at 10:42 AM
It's not really that noticeable, at least not from the outside. I built a internal wall frame
last year for the insulation and that holds up the rafters as well. When the wall was open
there was no no...
Posted in thread: Raise high the roof beam on 10-09-2013 at 12:58 PM
What happen is that sill plate got wet and rotten a bit , so i guess it depressed down. It also
looks like the front wall is pushing out, i think it is okay since it is stack wall and fairly
solid. I ...
Posted in thread: Raise high the roof beam on 10-08-2013 at 01:36 PM
There is couple of the beam that are separating. I guess i should try to repair, i think their
is a bit of hardware, a piece of metal with two loops on the the end that tights two threads
inward. Do y...
Posted in thread: Weird land survey on 10-06-2013 at 11:22 AM
That is interesting, sounds like with the electronic titles the squator right end too.The holes
are still fresh, so nobody stamped them out, i put stick in the hole, it's still there. It's
the exact s...
Posted in thread: Weird land survey on 10-05-2013 at 12:04 PM
They put the stakes in when did the survey, then a week later they took them out. When he put
them in said, don't put the fence up until the surveyor in the office checks everything.
Strange, like i s...
Posted in thread: Weird land survey on 10-04-2013 at 02:25 PM
You might remember my other thread about property lines. I decieded to get a survey done as to
settle the matter with the neighbour. I called around a few places, i was thinking to avoid the
Posted in thread: Best way to remove old cellulose insulation? on 10-01-2013 at 10:47 AM
I've been using the shopvac, but it gets filled up really quick. Is there a way to rig the
shopvac so it just sucks it out the window and then i can wet it down and rake it up?
Posted in thread: Vapour barrier over drywall? on 09-28-2013 at 12:05 PM
I've never heard of mold being corrected unless it just once getting wet. Looks like the flat
ceiling is okay just the slope. There is bunch of old celuose insulation up there along with a
Posted in thread: Vapour barrier over drywall? on 09-23-2013 at 12:24 PM
Up on the high ceiling there is:1) New dry wall2) Styrofoam 2"3) Old gypsum board somewhat
moldy, not sure to what extent4) some tin foil 1950's?4) Moor vents (new)5) roof with airflow
to outside vent...
Posted in thread: How strong do you think this is? on 09-05-2013 at 11:57 AM
Here's the latest photo, you still think 2 posts is enough? You choices are 2,4 or 6 ?I was
thinking if i take out that post then i could take out the other pieces too? see X's ,
considering the overs...