VIEW MY

karasdad

Gift Premium Subscription To karasdad

Join Date:

10-13-2013

Last Activity:

12-19-2013 5:21 PM

1 Likes on 1 Posts 

LATEST ACTIVITY

  • Posted in thread: Trane XE 90 pressure switch on 12-17-2013 at 06:14 PM
    Thanks lostpilot28, I had a builder friend of mine come over to check it out. He said the Trane
    XR90 is a single speed unit that runs wide open at 120 ton BTU all the time; it's a basic
    contractor mod...

  • Posted in thread: Trane XE 90 pressure switch on 12-16-2013 at 04:51 PM
    Well, I spoke too soon. Dealer called and said the replacement heat exchanger would not be
    available for 30 days, none in stock anywhere. Five weeks in the midst of the Seattle winter is
    a daunting pr...

  • Posted in thread: Trane XE 90 pressure switch on 12-16-2013 at 11:47 AM
    Hey lostpilot28, the Trane specialist came over and you are absolutely right, there was a four
    inch crack in the heat exchanger. They are replacing it on Friday along with the high limit
    switch on the...

  • Posted in thread: Trane XE 90 pressure switch on 12-10-2013 at 10:27 PM
    my five year old XR90 is experiencing the same three blinking lights. It takes about three or
    four inducer cycles to get it fired up. The pressure switched was replaced and it ran fine for
    about a mon...

  • Posted in thread: Trane XR90 - Pressure Switch on 10-13-2013 at 02:35 PM
    Thanks Gerrycurl21 for a great write up. I am experiencing a similar problem with my seven year
    old Trane XR90. my service guy just replaced the pressure sensor and it ran fine for a week and
    then sta...

  • Posted in thread: Trane XR90 - Pressure Switch on 10-13-2013 at 02:26 PM
    Hi, I'm new here and don't know how to post but Ive been reading this thread, Someone mentioned
    the Open High Limit Switch on a Trane XE 90, (LED blinking 4 times) I think thats whats wrong
    with my un...

  • Posted in thread: Trane XR90 - Pressure Switch on 10-13-2013 at 02:02 PM
    Hey Paul54426M, that's not the "start capacitor" circled, it's the run limit switch and you can
    just remove it from the old assembly and reuse it. the black wire plugs into the white
    connector along w...

0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS