Kelly M Bray
Last Activity:08-18-2010 12:10 AM
Posted in thread: Attic ventilation and furnace on 07-05-2010 at 09:29 PM
The problem is that it is a tile roof making any modifications difficult. The contractor who
did it is out of business I believe. Another covered all the soffit vents with Styrofoam
molding and stucco...
Posted in thread: Attic ventilation and furnace on 07-05-2010 at 12:57 PM
What about the effects on the Heating and AC systems? Does this create problems with combustion
Posted in thread: Attic ventilation and furnace on 07-02-2010 at 04:35 PM
I have a customer who had a remodel where all of the attic vents around the perimeter were
covered by stucco, and the dormers vents were removed when the roofing was done. The windows
and doors are al...
Posted in thread: Fixing plaster cracks once and for all on 11-02-2009 at 12:14 AM
No high clay content, more sandy and silty. No freezing, two miles from the beach. I am aware
of the movement issue.I am trying to find the best practice for this problem. I am wondering if
Posted in thread: Fixing plaster cracks once and for all on 11-01-2009 at 07:52 PM
I went through the forum, and I did not find exactly what I was looking for. I am going to
paint a friends living room. The house was built in the late 50's, plaster and button board.
There are long c...
Posted in thread: How to fill an abandoned drain on 10-06-2009 at 08:47 PM
Thanks folks, had to use an expansion plug. No way to really fill it up this round. thanks for
Posted in thread: How to fill an abandoned drain on 10-05-2009 at 11:14 PM
I am sure that it probably is still connected. It is a slab with no access under for me to
redirect the line. Is there a form of permanent plug that can be inserted and then capped with
Posted in thread: How to fill an abandoned drain on 10-05-2009 at 08:37 PM
I have a friend who has a room in their business that used to be a restroom. The drain hole is
still in the floor. There was just a piece of wood covering it. I would like to plug it, and
cap it with ...