Last Activity:07-03-2014 1:44 PM
5 Likes on 4 Posts
Posted in thread: replacing plug fuse on 07-03-2014 at 01:44 PM
I donít know what itís like in San Francisco (although I suspect itís the same or more strict
than here). I spent last weekend helping a friend make updates required to sell his house in
Posted in thread: replacing plug fuse on 07-03-2014 at 11:22 AM
That is even more reason to not crowbar those fuses. The wire coming into your house way back
when was sized to be a 60 amp circuit. That was common back in the day when no one had much use
Posted in thread: replacing plug fuse on 07-02-2014 at 11:33 PM
There is no main breaker in the breaker panel.I want to take the fuse box out of the equation
because I don't want to routinely replace fuses. I started blowing fuses one day and it became
a hassle to...
Posted in thread: replacing plug fuse on 07-01-2014 at 11:17 AM
I agree with Blue Jay. A 30 amp fuse setup would not even be used in a tiny apartment. I also
agree with if you donít have the understanding of what you have and what you have is working do
Posted in thread: attaching cat6 ethernet cable to joists on 07-01-2014 at 11:07 AM
P.S. - CAT6A versus CAT6 is a full gigabyte cable & I just saw CAT7 somewhere but, haven't had
time to look any further.Possibly may not be worth the time, most equipment doesn't come close
the cable ...
Posted in thread: attaching cat6 ethernet cable to joists on 07-01-2014 at 11:05 AM
Ordered new cable & internet and watched/helped the installer.He had a staple gun and staples
and just stapled the cable to everything. When I asked if he wasn't crushing the cable, he
showed me his g...
Posted in thread: attaching cat6 ethernet cable to joists on 06-30-2014 at 01:05 PM
I'm running new cat6 cable under my house / in a crawlspace. I don't want the cables dangling
like a massive jumprope.I see that the power / rg6 lines are stapled to the joists.What should
I use to at...
Posted in thread: replacing plug fuse on 06-30-2014 at 01:00 PM
Been a while, but here's my setup. I have a fuse box that feeds the circuit breaker.
Posted in thread: replacing plug fuse on 05-25-2014 at 02:46 AM
I have a circuit breaker that is fed by a fuse box that is fed by a power line from PG&E. Not
sure why the previous homeowner kept the fuse box when installing the circuit breaker, but it's
Posted in thread: Bad experiences with Panasonic FV-WCCS1-W WhisperControl Three-Function On/Off Switch on 05-14-2014 at 11:06 AM
Panasonic Whisper FV-11VQ5