Gift Premium Subscription To losttool

Join Date:


Last Activity:

07-02-2011 3:58 AM


  • Gardening
  • Environmental Contractor
  • John
  • M


  • Posted in thread: water leaking in basement after AC installed on 07-07-2011 at 08:09 PM
    Is there anyway to run the pipe outside?

  • Posted in thread: Recip saw on 07-01-2011 at 09:49 PM
    Milwaukee has always been a contractors tool that will hold up to rough treatment. If this is
    for ocassional use go with the Dewalt, but if you are working with this tool daily get the

  • Posted in thread: wood cutting on 07-01-2011 at 09:39 PM
    I take my measuring tape everytime I go to buy wood. Sometimes the wood is in the wrong stack
    and after I find a straight piece it is the wrong length.

  • Posted in thread: Refrigerator always on (mostly) on 12-06-2008 at 08:40 PM
    Check the shelves and drawers to make sure they are properly positioned and are not interfering
    with the door. I had a drawer keep my door ajar for a month last summer, plus an unknown
    substance had t...

  • Posted in thread: lets talk shop vacs on 12-06-2008 at 08:26 PM
    I bought a system at HD that pulled the suction through water before the vacume. The sanding
    pad had holes in it and it was attached to the vacume hose that ran through the 5 gal bucket of
    water that ...

  • Posted in thread: New Tile Cutting Blade on 07-20-2008 at 02:41 PM
    I read about a new blade in Contractors Tool and Supplies July edition that cuts curves in
    tiles. I went to the website and read about how the blade works. There were more
    videos on you...

  • Posted in thread: stops rust best? on 07-15-2008 at 01:53 PM
    WD-40 Stands for Water Displacing 40. And is a decent rust preventative. Houghton Intl
    developed the first RPs in th e 1860's and still makes the industry standard for long term

  • Posted in thread: How often are carpenters exposed to asbestos now adays? on 07-15-2008 at 01:21 PM
    I get calls from flooring and boiler people when they run into asbestos floor tiles and pipe
    insulation. They leave until I do the abatement and give them clearance.


Newest Threads