marklevinson1

LATEST ACTIVITY

• Posted in thread: cable attachment to house from pole on 05-25-2011 at 07:03 AM
  Hey Neal,thanks for the reply but I am not sure you are following me here. PSE&G refused to
  relocate the wires for me . Are you telling me the woman I spoke to gave me incorrect
  information and that t...

• Posted in thread: cable attachment to house from pole on 05-24-2011 at 12:07 PM
  Hi, I am getting ready to reside my house and replace some trim. I am doing the work myself.
  There are a few wires attached to the house on the fascia trim on the gable including electric
  . I had call...

• Posted in thread: Replacing trim on ranch along with vinyl siding install? on 05-23-2011 at 01:10 PM
  oldog/newtrick, joecaption,Thanks fellas for the input. As far as the DIY aspect, I hear where
  you are coming from as far as those jobs being screwed up by your average homeowner. I fall
  into the mino...

• Posted in thread: Replacing trim on ranch along with vinyl siding install? on 05-20-2011 at 02:06 PM
  Hi, I am in the research phase of replacing all the windows in my ranch style house and
  removing the lap siding and replacing with vinyl siding. One of the reasons I am going to use
  vinyl is the low m...

• Posted in thread: hanging drywall on ceiling on 04-11-2007 at 11:20 AM
  Hi,Just realized something else. I still need to deal with the opening into the kitchen which
  adds another 4 - 5 inches into the mix. You can see it on the plans at the lower left side.

• Posted in thread: hanging drywall on ceiling on 04-11-2007 at 11:07 AM
  Hi,I am remodeling my kitchen, finished with the plumbing, electrical and gas and insulation
  and am getting ready to hang the drywall on the ceiling. The dimensions of the ceiling are 12 x
  17. Here is...

• Posted in thread: height of drywall and finished floor on 04-05-2007 at 12:14 PM
  Hi,I have been remodeling my kitchen for the past year having stripped it down to the studs. I
  have completed the plumbing, electrical and gas and have just finished all the insulation and
  am now read...