Last Activity:08-08-2013 12:24 AM
Posted in thread: Heat pump fuse on 01-07-2010 at 01:02 PM
NP, Glad you figured it out.. Tape that wire up and zip-tie it somewhere out of the way of that
copper line.I wish it would either snow or warm up here in Knoxville as well, I don't mind the
cold if i...
Posted in thread: Compressor not running in heat mode on 01-06-2010 at 07:19 PM
Depending on your thermostat wiring and unit/thermostat, you should have a yellow wire to bring
in the compressor/cond. fan. Some thermostats will have one terminal for both heat and cool on
a HP for ...
Posted in thread: Living room decoration & ideas on 01-06-2010 at 06:17 PM
I didn't even think about checking videos, I will do that and see what I can come up with. To
run the wires through the wall you could cut the holes and maybe drop a string or something
down that you ...
Posted in thread: Heat pump fuse on 01-06-2010 at 06:09 PM
Check your thermostat wiring. The fuse inside the unit, I am guessing, is fuse for the control
board and if there are thermostat wires grounding somewhere it will short this fuse. Had a
customer once ...
Posted in thread: Living room decoration & ideas on 01-06-2010 at 06:03 PM
I like the mural, as well as the idea of the TV on the wall. If you get really froggy you can
run the wires behind the drywall and put the components in the empty spaces in the cabinet. I
would love t...
Posted in thread: Need a Windows Media Center Remote on 01-06-2010 at 05:43 PM
Care to list the hardware, specs, and software you're using? I have been trying to get an HTPC
up and running but I am going to have to change hardware. I am trying to use Ubuntu with XBMC
and a Vista...
Posted in thread: RTA kitchen cabinets? on 10-21-2009 at 01:39 AM
I would be interested in this too as a kitchen remodel is in my future as well..
Posted in thread: HVAC fan not working on 09-23-2009 at 03:11 AM
I am going to go out on a limb and say that if you have checked the Cap and it is good, there
is power to everything else, it could either be the Fan Relay/Control board or the fan motor
itself. Just ...
Posted in thread: Need to replace AC?. on 09-23-2009 at 03:07 AM
Make sure the installing contractor does a "Manual J"/ Heat Load Calculation. I am an HVAC Tech
and trust me, this makes a whole lot of difference over the "Oh your house is 2,500 Sq. Ft.,
you need a ...
Posted in thread: This guy is stealing my name on 09-18-2009 at 08:44 PM
Don't tell him about any of his meetings or special events that he gets notified of via email..
Then when he misses a few he will start telling everyone the correct name...