Gift Premium Subscription To maxdad118

Join Date:


Last Activity:

11-23-2017 9:35 PM

Likes Given: 60

15 Likes on 12 Posts 


  • Posted in thread: After Thermocouple Replace, Is Pilot & Burners Normal? on 11-02-2017 at 11:19 AM
    Get a a video of the flame inside the burner, hopefully it’s not touching the walls of
    the chamber=CO. As long as you have no delay in ignition and it’s venting it looks
    ok(from your video...

  • Posted in thread: Bathroom remodel costs...ballpark minimum on 10-29-2017 at 04:12 PM
    Yeah I want the big shower gone and put a tub/shower combo in its place..I believe I’ll
    gain some sq footage but I don’t need it. All the slate is coming off and want to keep it
    simple but...

  • Posted in thread: Bathroom remodel costs...ballpark minimum on 10-29-2017 at 09:01 AM
    Also, will the 1 piece fit through the bathroom entry door?Good question..I actually believe
    it’s a 3 piece system and not 1-piece? + the tub? I’m not sure but I think
    it’s made to g...

  • Posted in thread: Bathroom remodel costs...ballpark minimum on 10-29-2017 at 08:59 AM
    Will you be doing the work yourself? Material only?Or will this be hired out as a project? You
    mentioned water damage, do you suspect anything structural? What is below this room? Damage? If
    hired out...

  • Posted in thread: Bathroom remodel costs...ballpark minimum on 10-28-2017 at 11:42 AM
    I’m needing to remodel my main bathroom and will have to pull up sub floor due to water
    leaking thru shower. Whoever had the home before us decided to use slate everywhere in the
    bathroom and up...

  • Posted in thread: Wth? on 10-21-2017 at 12:49 PM
    Very possible it's a thermal cutoff gone bad? Is it an electric unit under the sink? Electric
    safeties can get weak over time and I'm not sure of how they are setup as I'm a gas guy and can

  • Posted in thread: Truly round baseboard corners? on 10-09-2017 at 04:48 PM
    Nice!! I like it when you don't have to pay an arm and leg to somebody
    else!��Looks great!

  • Posted in thread: Funny Pictures and stories.... on 10-06-2017 at 07:00 PM
    Here's one I found in Placerville, CA��

  • Posted in thread: Can't remove broken shower cartridge on 10-05-2017 at 08:15 PM
    Can you get a hold of anything with pliers?? If not can you drill a small pilot hole in the
    remaining plastic(careful not to go through the body) and screw in a lag bolt or screw and grab
    the head wit...

  • Posted in thread: Shower head pivot on 10-04-2017 at 11:01 PM
    Why not just replace the arm with one that has a sharper angle?Is there such a thing?


Newest Threads