mayhem69

LATEST ACTIVITY

• Posted in thread: blowing in fiberglass DIY on 09-08-2010 at 01:38 PM
  you guys need to google better, not just throw around your lack of knowledge and
  links.Cellulose or fiberglass in a flood like Katrina would need to be replaced there
  Dick.Cellulose is a relatively ne...

• Posted in thread: blowing in fiberglass DIY on 09-08-2010 at 05:21 AM
  Cellulose is superior in the end and it does not have possiblity of supporting mold.Dickthat's
  not what i have read from other end users. Cellulose is ground up treated recycled paper,
  right? Well.......

• Posted in thread: blowing in fiberglass DIY on 09-07-2010 at 06:23 PM
  yea, i read good things about the blow in certainteed SP insulation. I found an old friend from
  high school that does it. He did the job for $700 cash. I noticed a BIG difference right away
  in heat an...

• Posted in thread: can i put water based poly over oil base? on 01-30-2010 at 02:20 PM
  Hi, getting my bedroom floor redone. The guy said he was gonna spread oil based coat on bottom,
  then apply Bona Mega, then Bona Traffic on top. Does this sound right?

• Posted in thread: my roof is blowing away! on 01-26-2010 at 04:49 AM
  Mayhem, rubber (epdm) is a great product IF installed correctly, but remember it has NO, NO
  warranty on residential applications.no warranty really? that doesn't make sense.

• Posted in thread: my roof is blowing away! on 01-25-2010 at 01:18 PM
  Hi, i have an older maybe 60 yr. old custom cape cod with big dormer. Above the dormer the
  roofing material started to blow away last night after heavy winds. My father in law called the
  material cold...

• Posted in thread: what do i do? my door trim has a 1/4" gap on 01-06-2010 at 04:48 AM
  yes, i had to cut 2 nails and now i can move the upper corner of the frame and re-center.

• Posted in thread: what do i do? my door trim has a 1/4" gap on 12-31-2009 at 12:57 PM
  now i know what is wrong, the builder didn't center the frame correctly. That is just shoddy
  workmanship. Samson Builders from Perkiomenville SUCKS!

• Posted in thread: what do i do? my door trim has a 1/4" gap on 12-31-2009 at 09:11 AM
  Hi again, sorry to be a pain. Looks like my door frame wasn't centered correctly and now when i
  put the trim on there is a 1/4" gap on one side. It is about the top 1/3 of the door and slowly
  tapers t...

• Posted in thread: installing a double door in a 48" opening on 12-30-2009 at 04:57 PM
  I don't think hanging 2 doors on the existing frame would look too good. The doors would be
  smaller than 24" in width. I already ripped down the existing frame and will be purchasing a 32
  or 36" door ...