MikeP

LATEST ACTIVITY

• Posted in thread: clover removal ? on 05-20-2012 at 06:54 PM
  A weed killer will not do a great job killing clover. Never had luck with it. The only thing I
  have found to work is to overseed your lawn and it will choke out weeds. The thicker your lawn,
  the less ...

• Posted in thread: Recommended Pool Robot on 02-02-2012 at 11:08 PM
  I have had to replace the bags once and they need to be replaced again. Not bad though for 10
  yrs

• Posted in thread: Recommended Pool Robot on 02-02-2012 at 11:07 PM
  I believe its the aquabot pro. Its packed away for winter. I never use the remote or the timer.
  I just let it run all night and it gets everywhere.

• Posted in thread: Recommended Pool Robot on 01-27-2012 at 10:50 PM
  I have an Aguabot that I have had for over 10 years. Every now and then I have to replace a
  belt or track, the bags hold up and hold alot. I have a 20'x40' in ground concrete pool with
  stainless sides...

• Posted in thread: brand new bathroom on 01-18-2012 at 07:42 AM
  I'm with nealtw, you shouldn't vent an exhaust out of the soffit if you have soffit vents. The
  vents are pulling air into your attic, therefore they will pull the moist warm air in and cause
  mold prob...

• Posted in thread: Ceramic Tile or Laminate Wood Flooring on 01-11-2012 at 08:08 AM
  I wouldn't leave the baseboard down. Its going to make it more difficult. You'll need big
  quarter round then and it'll also make your baseboard look smaller because it's not sitting on
  the floor like ...

• Posted in thread: Ceramic Tile or Laminate Wood Flooring on 01-10-2012 at 12:25 PM
  You'll need to pull the baseboards and any quarter round. The laminate floor has to have room
  to expand and contract. You can't but it up against the wall, you will need a gap that the
  manufacturer re...

• Posted in thread: Homeowner Test to see if wood is Pressure Treated? on 12-28-2011 at 11:18 PM
  PT lumber is not as green as it used to be because they are no longer using CCA to treat it.