Last Activity:07-10-2006 5:16 PM
Posted in thread: panasonic cordless on 07-09-2006 at 03:11 PM
thanks, the second one worked. Did you come across any e- or retailers still selling these?I've
been mediocre at best. Thanks, hope you're doing well.
Posted in thread: panasonic cordless on 07-09-2006 at 01:03 PM
I recently aquired a brand new panasonic ironman 9.6v off-set drill / driver. What an amazing
find, I've never seen anything like it. It's awesome. Anyway, I was just curious about it so I
Posted in thread: Floating Shelf on 05-10-2006 at 10:53 PM
We've got cabinet makers here, where are you guys? I've built a lot of cabinets, but I don't
claim to be final authority. See if someone else will respond with a better way to do this and
maybe we wil...
Posted in thread: Floating Shelf on 05-10-2006 at 10:43 PM
ok, i went back and actually read the posts and viewed the pics. Mount a "nailer" to the wall
(via studs) and set yer boxes over it. Basically, forget about mounting the cab. focus on
mounting a naile...
Posted in thread: Floating Shelf on 05-10-2006 at 10:33 PM
this is actually fairly easy. I would make a inner shelf for the system to rest on with a 2x6
laying flat (perpendicular to the wall) and brace it with some 2x4's at a 45 degree angle. Cut
the 2x6 abo...
Posted in thread: Fear of clowns on 05-10-2006 at 10:29 PM
Rated 3.6. That's awful.Killer Klownz From Outer Space was a classic clown movie I enjoy
watching. It's cheesy as wlel.ditto, i agree whole heartedly. this movie can only be seen on
the usa network on...
Posted in thread: be careful! It happens to the best. on 05-06-2006 at 08:17 PM
I pray that no one else has to suffer through stupidity as I have done. But, as you say, after
so many thousands of hours, carelessness does sort of creep in, because it becomes "route" and
almost so ...
Posted in thread: Friendly People on 05-05-2006 at 11:08 PM
The meaning behind a reply and the impression that others get when reading are often very
different.remember folks, font doesn't express emotion, or carry a tone!People have different
thoughts on a ce...
Posted in thread: be careful! It happens to the best. on 05-05-2006 at 12:12 AM
sorry about the page you viewed, it's since been edited.Well, it healed better than was
expected. It looks pretty good at this point. I will post updated pics when i get a chance.
Posted in thread: Is this expectable in the trade? on 04-25-2006 at 08:15 PM
I read all of the posts, but I don't recall seeing the ctop material. Anyway describe "warped".
If indeed it is twisted or even out of level, it's not to industry standard. On top of the bbb,
If you wanna hang with me bring a rope.
- Window air condition unit
- Carrier AC Outside Fan Will Not Turn ON
- fan wont shut off
- No Water Running Into or Out of Toilet
- Need some advice
- genie isd 990 excelerator will not stay on
- Exhaust Fan In Bathroom
- Need some help
- drylocking basement and removing mold on concrete
- One Word Game
- Flashing problem?
- Lawnmower Question
- Size of intake vent?
- Hall Way Door - Is this load bearing?
- Hallway header options where door is
- Granite Installed - Possible Issue?