mrken

LATEST ACTIVITY

• Posted in thread: Laminate Flooring on Two Different Concrete Heights on 01-11-2011 at 01:01 AM
  The concrete slab is on a very flat piece of land...Please share his mistakes regardless. :)

• Posted in thread: Laminate Flooring on Two Different Concrete Heights on 12-14-2010 at 11:35 AM
  Sadly, it is a 2100 square feet home in expensive west-side Vancouver that cannot possibly be a
  converted garage... I had just bought the home at 15 years old and do not have a history of the
  builder....

• Posted in thread: Laminate Flooring on Two Different Concrete Heights on 12-14-2010 at 03:23 AM
  I am planning to install laminate flooring in a room the main level of a concrete slab. After
  peeling off the original carpet, there appears to be a few inches of uneven concrete that runs
  along the d...

• Posted in thread: Water penetration? Broken chimney stucco at gutter on 08-31-2010 at 03:26 PM
  The kick out flashing is the first piece of step flashing on the wall. What type of roof
  surface do you have?Sorry, I meant on top of the stucco wall.The roof surface is concrete
  tiles.Thank you!

• Posted in thread: Water penetration? Broken chimney stucco at gutter on 08-31-2010 at 02:29 PM
  You need what is called kick out flashing at the end of the run. It directs water out ,away
  from the building and into the gutter.You will need to remove the gutter, and poke into the
  hole to see if t...

• Posted in thread: Water penetration? Broken chimney stucco at gutter on 08-31-2010 at 02:47 AM
  I am planning to buy a house in rainy Vancouver, BC, but found a potential problem.The chimney
  stucco at the end of the gutter is broken, revealing the wood beneath: metal roof flashing
  appears to le...