Last Activity:12-12-2010 5:31 PM
Posted in thread: Side walk replacement on 12-17-2010 at 09:53 AM
I'm going to "Jack it up" manually and try to place some supports or supporting materials under
it to see if it stays in place.
Posted in thread: Wood over vinyl on 12-12-2010 at 11:26 AM
Is it OK to install a hard wood floor over an existing vinyl floor? It sure save a lot of work
if I can.
Posted in thread: Trane XB10 wiring on 11-04-2010 at 08:02 AM
Again Thanks for your time and expertise. I'm going to hook it up to the capacitor tab and go
Posted in thread: Side walk replacement on 11-03-2010 at 07:03 AM
Should I broom the concrete after trowelling or just let it "as is" after trawelling. I really
am new at this cement work and just want it to look OK
Posted in thread: Trane XB10 wiring on 11-03-2010 at 06:44 AM
Hi Mr. Paul,So do you believe it is OK to place the brown wire on the capacitor permanently?. I
guess I just need to be sure I'm not hurting anything.Thanks so muchMtowner
Posted in thread: Side walk replacement on 11-02-2010 at 01:18 PM
The side walk pad has sunk where Istep up to the cement pad for the front stoop. It is a rather
new home and I've been told by neighbors that the area has been filled in to make grade when
the hous wa...
Posted in thread: Trane XB10 wiring on 11-02-2010 at 06:28 AM
When I touch the brown connector to the 3rd pole on the capcitor the fan runs normally. Would
it seem right for the brown lead to be directly attached to the capactor rather than on the
relay? I just ...
Posted in thread: Trane XB10 wiring on 10-31-2010 at 09:16 AM
I've attached two pictures which may help...THANKS!
Posted in thread: Trane XB10 wiring on 10-30-2010 at 09:46 AM
Here is what I see.Capacitor (round beer can looking thing)has three tabs on top. One has no
wire connected, one has an thick orange wire and the other tab has a purple wire and a black
wire. Orange a...
Posted in thread: Trane XB10 wiring on 10-28-2010 at 12:38 PM
The unit located outside, I guess it is the Condensor coils. The fan only turns slowly and then
it shuts off and hums. I'm guessing the brown wire is not located on the correct termnialAny
help is app...