Mudball

LATEST ACTIVITY

• Posted in thread: Special rebar on 08-27-2006 at 06:45 PM
  That sounds like a great plan. Thanks for the help glennjanie.

• Posted in thread: Special rebar on 08-25-2006 at 04:03 PM
  Is there a special rebar with larger edges (ribbed) for extra holding strength when putting it
  in concrete bond beam blocks ?Or will regular rebar work just fine ?Thanks

• Posted in thread: Enough room for hanging duct work on 08-16-2006 at 06:01 PM
  That sounds great. Thanks for the information.

• Posted in thread: Enough room for hanging duct work on 08-14-2006 at 05:29 PM
  I currently have concrete block walls high enough that when the concrete floor pad is poured
  and that when the trusses were set on the block walls then I would have 8 foot high interior
  walls/ceiling....

• Posted in thread: Building another gazebo on 08-06-2006 at 04:34 AM
  Looks really great. Thanks for the pictures.

• Posted in thread: Siding Cement Block on 07-26-2006 at 09:01 AM
  Is this the right tool ? would it be the frame master ?I hope this is something a person can
  rent ???Im not ready for this stage right now but like to plan ahead.Im asking because I too
  will be consi...

• Posted in thread: Siding Cement Block on 07-24-2006 at 06:22 PM
  Im not sure of your specific application but I forgot to mention that you might want to
  consider installing some rigid foam board in between the furring strips.

• Posted in thread: Siding Cement Block on 07-24-2006 at 06:19 PM
  Im not sure about the edcon block but if they are like the old common concrete cinder block
  then you would need to install wood strips that are at least one and one-half inches thick so
  the vinyl sidi...

• Posted in thread: Thread sealer on 07-24-2006 at 05:58 PM
  I will do it. Thanks for the help and explanation.

• Posted in thread: Thread sealer on 07-23-2006 at 04:28 AM
  Sounds great. Is there a special teflon tape for this or is it the same small teflon tape that
  I currently have and use on 1/4" air line fittings ?Thanks