newdiyer

LATEST ACTIVITY

• Posted in thread: Wiring DW and Disposal on 04-02-2007 at 11:17 AM
  Thanks Petey and Andy,I like your suggestions. Two more things.A. Does this need GFCI? I will
  be using a dedicated 20 AMP circuit, that is dedicated exclusively for both the disposal and
  the dish wash...

• Posted in thread: Main to sub (main lug) panel wiring on 03-22-2007 at 10:16 AM
  I have a full 100 AMP main, installed a main lug fed by a 60AMP breaker on the main. Between
  the main and main lug I have NM 6-3 WG copper. I did not use conduit or an offset conduit, but
  rather 1" DI...

• Posted in thread: Main to sub (main lug) panel wiring on 03-21-2007 at 11:04 AM
  I have a full 100 AMP main, installed a main lug fed by a 60AMP breaker on the main. Between
  the main and main lug I have NM 6-3 WG copper. I did not use conduit or an offset conduit, but
  rather 1" DI...

• Posted in thread: MR16? Worth the price? on 03-15-2007 at 11:07 AM
  Best light meaning white light, full spectrum of colors and at the right temperature (3000 or
  so Kelvin). In other words, are there any benefits of MR16 to normal halogen other than of
  course power co...

• Posted in thread: Panel Mounting Question on 03-14-2007 at 05:05 PM
  Are there any guidelines for subpanel mounting that one should take note of? It will be in the
  basement, and there is no more room to mount the subpanel on the same backing that the main is
  attached t...

• Posted in thread: Wiring DW and Disposal on 03-14-2007 at 04:53 PM
  Any suggestions on wiring the dishwasher and disposal on the same 20 amp circuit under the
  sink? I have heard that it is ideal to put a switch in the sink cabinet independently
  controlling the dishwas...

• Posted in thread: MR16? Worth the price? on 03-14-2007 at 04:24 PM
  I have heard that the MR16 low voltage cans produce the best light. Anyone find this to be
  true, and if so, worth the extra price compared to normal halogen?Your thoughts are welcomed.