Last Activity:11-01-2013 10:42 PM
Likes Given: 1
Posted in thread: Shower mold/caulking problem on 10-30-2013 at 05:32 PM
So once I get everything dry and tidy, given some of the larger gaps, should I be filling them
with sanded GROUT or sanded caulk, or what material? Thanks,Leor
Posted in thread: Shower mold/caulking problem on 10-29-2013 at 04:22 PM
There is no visible water at this point. So I should apply GROUT between the wall/floor, not
caulk? When you say corner joint, you mean literally, just the 4 corners?
Posted in thread: Shower mold/caulking problem on 10-29-2013 at 02:51 PM
Thanks for the response. See below: -- Did you dig out all the old caulk or grout? Yes-- Did
you clean the line with denatured alcohol to remove all traces of old silicone above and below
the caulk li...
Posted in thread: Shower mold/caulking problem on 10-28-2013 at 06:37 PM
We have a tile shower stall that was built several years ago. The pan is composed of a membrane
liner and concrete pad, with tile over that. The caulking around the perimeter of the floor
would get mo...