nospmahm

LATEST ACTIVITY

• Posted in thread: What ballast to use? on 04-16-2012 at 07:45 AM
  Thanks Joe,I put new bulbs in yesterday and had no problems for a few hours then reinstalled
  the plastic lens and after that the bulbs worked, but were slower. It does not make sense. I'll
  give it a f...

• Posted in thread: What ballast to use? on 04-15-2012 at 07:51 AM
  Sorry, it was not helpful.

• Posted in thread: Ceiling Fan Trips Breaker on Different Circuit? on 04-12-2012 at 08:00 AM
  I agree with nealtw, too bad Thumperstein did not come back to this site, after a month, and
  post his results!

• Posted in thread: What ballast to use? on 04-12-2012 at 07:55 AM
  I can't afford $120+ for 2 bulbs.

• Posted in thread: What ballast to use? on 04-11-2012 at 11:53 AM
  I have a bathroom wall fluorescent light fixture with 2-30FT12/CW/RS lamps. The fixture is
  about 10 years old and I love it, when it starts properly. About 5 years ago I had to turn it
  off and on a fe...

• Posted in thread: Floor squeaks between upstairs and finished downstairs. on 07-21-2011 at 10:47 AM
  I was "the guy" that installed the laminate flooring so I am the guy to remove it, which
  includes moving a 600# armoir and the quarter round.I will do it because I am also the guy
  sitting in my reclin...

• Posted in thread: Floor squeaks between upstairs and finished downstairs. on 07-21-2011 at 07:25 AM
  Sorry for the delay getting back, been putting out other fires!When I bought the house, the
  space under the upstairs porch was open, I enclosed it about 16 years ago. I put up a temp wall
  parallel to ...

• Posted in thread: Floor squeaks between upstairs and finished downstairs. on 07-19-2011 at 06:21 PM
  We have a 2 story house, the lower level is a finished den with sprayed ceiling (popcorn), one
  half of the above area is the living room and the other half is a covered porch. Between the
  living room ...