VIEW MY

ozarkdan

Gift Premium Subscription To ozarkdan

Join Date:

04-24-2013

Last Activity:

05-15-2013 11:50 AM

1 Likes on 1 Posts 

LATEST ACTIVITY

  • Posted in thread: Weed Trimmer, Runs in START, dies in RUN on 05-15-2013 at 10:49 AM
    What I found out is that Electrolux bought Poulan some time ago and they were the ones
    responsible for changes to a number of products, including the weed trimmers. Apparently they
    couldn't make up th...

  • Posted in thread: Weed Trimmer, Runs in START, dies in RUN on 05-14-2013 at 09:33 PM
    I am providing a photo of the adjustments on the carb. As you can see, they are spline'd and
    recessed. Because they are recessed, cutting slots into the ends is pretty difficult unless I
    find a way to...

  • Posted in thread: Weed Trimmer, Runs in START, dies in RUN on 05-05-2013 at 11:51 AM
    Kind of hard to describe exactly, but the heads of the adjustment screws had what looked like
    about 15-20 straight splines. I could put a piece of rubber tubing on them but they were too
    stiff to turn...

  • Posted in thread: Weed Trimmer, Runs in START, dies in RUN on 05-03-2013 at 10:35 AM
    Thanks very much for the feedback and ideas. Here's what I've done: 1. I applied high temp
    silicone grease around the gasket/O'ring and saw no difference in starting or running. This is
    a trick I lear...

  • Posted in thread: Weed Trimmer, Runs in START, dies in RUN on 04-24-2013 at 04:35 PM
    I have a Poulan PPB 150E weed trimmer that wouldn't start this season unless I shot fuel into
    the carb past the butterfly. Then it would only run for a few seconds. I replaced the fuel
    lines, filter, ...

0 COMMENTS
POST A COMMENT