Last Activity:02-01-2017 4:56 PM
6 Likes on 6 Posts
Posted in thread: Can you glue lay loose vinyl floor planks? on 12-21-2016 at 08:49 AM
The flooring was used on a commercial shoot and laid out on a set for about a week. In that
application, it was a fast way to create a floor on a concrete surface. It's really nice and
thick, with a g...
Posted in thread: Can you glue lay loose vinyl floor planks? on 12-18-2016 at 03:38 AM
They are not the click lock version. They are just planks that lay flat, side by side with no
way to lock them into one another. Seems odd to me, but I guess it's just the friction which
keeps them to...
Posted in thread: Can you glue lay loose vinyl floor planks? on 12-16-2016 at 10:41 AM
Long story short, I was given quite a bit of lay loose vinyl floor planks and was planning on
installing in an old lake cabin which currently has carpeting. My issue is the floor of the
cabin isn't le...
Posted in thread: Need to raise metal carport two feet. on 09-05-2016 at 10:53 AM
The carport came from All Steel Carports in Indiana. I contacted them and they do not sell leg
extensions.Here's what I'm thinking now. Start by lifting up one end of the carport with a farm
Posted in thread: Need to raise metal carport two feet. on 09-05-2016 at 06:21 AM
I have a metal 12' wide by 26' deep metal carport I need to raise 2' to fit a travel trailer.
The carport currently has a rail on the bottom on both sides, six support legs each side, with
four or fiv...
Posted in thread: Best urinal for home use? on 10-29-2015 at 09:19 PM
Ok, Sparky, you've got me thinking about it. Since I've never seen one installed, how difficult
is it? There is a clean out (3 or 4") which currently is reduced down to act as a drain for an
Posted in thread: Best urinal for home use? on 10-27-2015 at 05:32 AM
So I've been considering making a small storage area in my basement a 1/4 bathroom with a
urinal and sink for some time and I've about got myself talked into it. The space is currently
Posted in thread: High Humidity in House? on 08-11-2015 at 06:07 AM
Thanks for all the feedback. I will go ahead and Google the model number of the furnace (it's
newer, maybe an Evolution model heat pump and AC) to see what they recommend, but will be going
to Home De...
Posted in thread: High Humidity in House? on 08-10-2015 at 07:13 AM
95809581Apologies if this isn't in the correct section, but I could not find a HVAC section.
This is the second summer we have been in our farm house and this year we have gotten a lot of
Posted in thread: Best way to fix rotten garage trim at ground? on 08-06-2015 at 07:00 AM
I like the idea of the two part epoxy, but cannot find the product referenced in the video. I
have read reviews on the Home Depot site that the "new" Elmer's two part putty product doesn't
last / isn'...