VIEW MY

parkerea

Gift Premium Subscription To parkerea

Join Date:

06-08-2011

Last Activity:

06-13-2011 8:43 AM

  • Los Angeles
  • CA

LATEST ACTIVITY

  • Posted in thread: How much door warp is acceptable? What can be done? on 06-13-2011 at 11:16 PM
    Thanks for the interesting caliper tidbit, Mr.Parker!!I would not have figured that one
    out!RC/DGAre you kidding? Small price to pay for the Qlon weatherstrip info! Now, if you want
    to know how to rea...

  • Posted in thread: How much door warp is acceptable? What can be done? on 06-13-2011 at 07:43 AM
    ...Qlon kerf weatherstrip does come in different thickessor reach configuration. You could use
    the thinner one by the latch areaand then cut in a thicker piece above and below to help take
    up the spac...

  • Posted in thread: How much door warp is acceptable? What can be done? on 06-11-2011 at 03:17 PM
    ...You can be sure they try very hard to limit this problem as warped boards are impossible to
    machine ....The warranty is good for a year. On Friday I officially accepted the door after the
    installer...

  • Posted in thread: How much door warp is acceptable? What can be done? on 06-09-2011 at 06:28 PM
    When you close the door, do you have to push hard to get it to latch?Quite the opposite. The
    latch side stile barely compresses the weather stripping, and since it is bowed inwards, the
    top and bottom...

  • Posted in thread: How much door warp is acceptable? What can be done? on 06-08-2011 at 06:49 PM
    ...What do YOU think is acceptable for the amount you paid for the door? When buying a door, I
    expect it to be flat. ...I realize nothing is perfectly flat. The bow is about 3/16 -- almost a
    quarter i...

  • Posted in thread: How much door warp is acceptable? What can be done? on 06-08-2011 at 08:24 AM
    I just had a solid oak entry door installed. It is noticably warped, bowed so the latch side
    stile pulls away from the jamb stop and weather stripping at the top and bottom. It is a
    beautiful, expensi...

0 COMMENTS
POST A COMMENT