VIEW MY

pedsot

Gift Premium Subscription To pedsot

Join Date:

01-05-2007

Last Activity:

08-09-2010 9:08 AM

    ABOUT ME

  • Daddy's girl, love tools and figuring out how to fix something.
  • work, fixing things
  • Occupational Therapist
  • Lori
  • female
  • Just purchased new home
    need to fix roof on workshop
    need to paint workshop - lots of carpenter bees!
    need to figure out why central vac has less suction on main floor
    fill cracks in sidewalk/carport/patio
    need to figure out how to stop water from dirt road from entering driveway
    need to fix drainage at low end of circle drive
    the list goes on .....

LATEST ACTIVITY

  • Posted in thread: remove paint from old metal chairs on 08-09-2010 at 07:47 AM
    Oh yeah, and the wire wheel itself was only suppose to be used at a max of 4500 rpms. The
    little wires still fly off on my benchtop grinder and hit me in the face. I usually have to
    wear eye protectio...

  • Posted in thread: remove paint from old metal chairs on 08-09-2010 at 07:39 AM
    Wow, I did not realize how dangerous moving the wire wheel to my hand grinder would be. I did
    check and the benchtop is rated at 3400 rpms and the hand grinder is 11000 rpms. Crazy! Thanks
    for the adv...

  • Posted in thread: remove paint from old metal chairs on 08-08-2010 at 08:53 AM
    Having trouble removing paint from metal chairs that my mom gave to me. I began by using
    sandpaper...a lot of elbow grease not much paint removal. I then tried a scraper well it was
    actually a wood ch...

  • Posted in thread: plug does not fit in outlet on 05-11-2008 at 04:18 AM
    Thanks Square Eye!

  • Posted in thread: plug does not fit in outlet on 05-08-2008 at 07:22 PM
    Actually, I purchased a power strip and the plug fits right in and did not have to change the
    plug at all. The wire is in good shape the outlet is for 3 prong plugs but just did not fit. I
    needed the ...

  • Posted in thread: plug does not fit in outlet on 04-26-2008 at 05:04 AM
    A new replacement end? Does that mean I splice it together? Or do I take the back of the
    grinder apart and start there? I'm sure I could stop by Lowe's and they would explain to me how
    to replace the ...

  • Posted in thread: plug does not fit in outlet on 04-26-2008 at 03:26 AM
    I recently purchased an old benchtop grinder from an estate auction. It has 1964 printed on the
    label. I tried to plug it into the outlet and it would not fit. The ground is round and the
    hole is not!...

  • Posted in thread: old bldg vs. metal bldg. on 01-08-2007 at 04:34 PM
    Molson, Thanks for the information. I sent for a free information packet from the website you
    provided. I would possibly be spending 4-6 hours a day in the building a day with high energy
    children. I ...

  • Posted in thread: old bldg vs. metal bldg. on 01-07-2007 at 06:31 AM
    Dick, thanks for the advice. I will keep it in mind while I'm looking for a location.

  • Posted in thread: old bldg vs. metal bldg. on 01-06-2007 at 11:47 AM
    Well, I just got back from looking at the place I was hoping to be my future business and was
    informed that the place would probably cost $300,000+ to fix it up enough to make it a
    business:( . He tol...

0 COMMENTS
POST A COMMENT