poet2dager

LATEST ACTIVITY

• Posted in thread: Applying flagstone to cinder blocks on 08-20-2010 at 09:29 AM
  thank you for your help, I already tooled the joints when I layed the cinder blocks, my last
  few steps are putting the liner in, cutting away the excess, and attaching the flagstone to the
  cinder bloc...

• Posted in thread: Applying flagstone to cinder blocks on 08-17-2010 at 02:37 PM
  Any suggestions on what kind of mortar I should use? something strong that will give a little
  for expansion and contraction? I also need something that will stick well to the cinder blocks
  and keep th...

• Posted in thread: Applying flagstone to cinder blocks on 08-17-2010 at 09:37 AM
  I am probably at the lowest level of knowledge about masonry, would you mind explaining what (
  'tool' the joint) means? or maybe direct me to a website that could help?

• Posted in thread: Applying flagstone to cinder blocks on 08-17-2010 at 07:10 AM
  yes, I am using a pond liner, cinder blocks are just to add support and some height so the
  water won't be too shallow and heat up the pond during our hot afternoons. Itsreallyconc: my
  first plan was t...

• Posted in thread: Applying flagstone to cinder blocks on 08-16-2010 at 07:32 PM
  It is natural flag stone, and most of the pieces are 1 1/2 inches thick, as far as the surface
  of the pond, it has a small small concrete layer with cinder blocks going around it as a wall,
  this wont ...

• Posted in thread: Applying flagstone to cinder blocks on 08-16-2010 at 07:48 AM
  I am building an above ground pond, I bought flagstone hoping to place it on the wall of the
  pond to make it look more natural. I am trying to find a good material to use to get the
  flagstone to stick...