VIEW MY

PolyBatman

Member

Gift Premium Subscription To PolyBatman

Join Date:

05-26-2014

Last Activity:

01-08-2018 7:42 PM

Likes Given: 2

4 Likes on 4 Posts 

LATEST ACTIVITY

  • Posted in thread: Question about toilet flange on 01-08-2018 at 01:31 PM
    I went looking, you might be able to just use a flange repair
    kit.https://www.youtube.com/watch?v=kqbbkU3Lu8U&ab_channel=DODGENEONRACINGLLC.That could
    definitely be possible, since it looks like PVC w...

  • Posted in thread: Question about toilet flange on 01-08-2018 at 12:53 PM
    Really, no ideas? 45 views? I have to work on this tomorrow so I was looking for a bit of
    advice before I started tackling it. If you need any clarification or additional information
    just let me know!

  • Posted in thread: how to keep a water line from freezing? on 01-07-2018 at 07:48 PM
    Insulation on the pipe? Does the pipe run in the wall, and if so is there insulation in the
    wall where the pipe runs? You could always keep the water running at times when you're afraid
    it will freeze...

  • Posted in thread: Question about toilet flange on 01-07-2018 at 06:58 PM
    Hello, I have a rusted toilet flange that currently sits below the finished tile floor by about
    a 1/2". The pipe is 3", and the old flange is glued to the outside of the pipe. There is a tile
    floor an...

  • Posted in thread: Painting brick fireplace, stain vs prime + paint on 09-08-2017 at 01:26 AM
    I did a few over the years. Good results were obtained by cleaning as much as possible followed
    by priming with an aggressive acrylic primer then top coating with a first line 100%
    acrylic.Perfect, I'...

  • Posted in thread: Question about fireplace mantel on 09-07-2017 at 11:23 AM
    Often the 2x4 is attached flat to the brick and the mantle fits over that with a couple screws
    holding it to the 2x4. But the unit has to be built well so it does not fall apart when loaded
    up.So do y...

  • Posted in thread: Question about fireplace mantel on 09-07-2017 at 12:25 AM
    I figured this would be the best place to ask. I just got an older home not sure on the year
    maybe around the 1970's or early 1980's. I was going to paint my fireplace but I also wanted to
    fix the man...

  • Posted in thread: Painting brick fireplace, stain vs prime + paint on 09-07-2017 at 12:22 AM
    Hello, I have been doing some research on this and I've got some mixed reviews. I've seen
    someone people recommend stain because it allows the brick to breathe but I haven't been too
    impressed with th...

  • Posted in thread: Question about tiling a shower. on 03-10-2017 at 03:42 PM
    Do you have any bullnose tiles available to give you rounded edges?No I don't, all the cuts are
    going to the corner of a wall. I also realized that adding a piece of hardieboard to the side
    wall was t...

  • Posted in thread: Question about tiling a shower. on 03-03-2017 at 05:07 PM
    you can get backer in 1/2 or 1/4 inch, would it be easier to just add to the thickness of the
    half wall to match the curb.That is a possibility but it would put the backer board past the
    door jamb. I ...

0 COMMENTS
POST A COMMENT


Newest Threads