Gift Premium Subscription To poppamole

Join Date:


Last Activity:

06-03-2013 11:09 PM


  • home repair, motorcycles
  • Kevin
  • jersey shore


  • Posted in thread: Mice on 11-10-2011 at 03:56 PM
    go to, and type in " kness tip trap" I have caught and released dozens of mice with
    these traps that use no chemicals, only peanut butter. once the mouse gets inside, the trap
    rocks and clo...

  • Posted in thread: Best and worst live bands on 08-17-2009 at 04:18 PM
    give a listen to Clutch, great live act, and Neil Young with Crazy Horse

  • Posted in thread: How to tile over old vinyl-tile adhesive? on 08-17-2009 at 04:10 PM
    if you have the room, screw down 1/4 in cement board right over the linoleum, then lay tile
    over that. wonder board and Durock are some brand names. good luck with it

  • Posted in thread: Switch Loops on 08-16-2009 at 05:24 PM
    check out , it shows some basic wiring diagrams. I learned basic wiring
    from reading about it, understanding the basics, and a test light, or meter will help you
    figure out what ...

  • Posted in thread: Lawn mower wont run on 08-15-2009 at 04:12 PM
    clean the air filter, drain the fuel tank and fill with fresh Regular gas, should run then

  • Posted in thread: My undermount bathroom sink fell out on 08-13-2009 at 06:50 PM
    I think there is a kit with brackets and cam mounts, you drill 4 holes in the underside of the
    countertop, which accept the cam fasteners. which hold the brackets against the sink bowl. I've
    seen them...

  • Posted in thread: Exterior Door Light (window) replacement on 08-13-2009 at 06:31 PM
    the cover plugs pop out pretty easy, a utility knife works well. I bought a half circle window
    for my stanley solid steel door and cut the door to install it. the window had a bead of caulk
    already on...

  • Posted in thread: GE Bottom Freezer Refrigerator not cooling on 08-13-2009 at 06:26 PM
    check the fan motor, same thing happened to me. freezer worked fine, but fridge didn't cool
    down. replaced fan motor, and all is well. hope this helps you out

  • Posted in thread: 34" interior door on 08-13-2009 at 06:23 PM
    rip a 36in down to 34in, I've taken 8 in off the bottom of a hollow core door, saved the solid
    bottom piece, and glued it back into the open bottom. the door looked like it was made that
    size. for the...


Newest Threads