pstew96

Member

Gift Premium Subscription To pstew96

Join Date:

04-20-2011

Last Activity:

08-12-2016 12:47 PM

Likes Given: 1

1 Likes on 1 Posts 

  • NYC
  • NY

LATEST ACTIVITY

  • Posted in thread: Install flashing after the fact... on 08-09-2016 at 08:11 AM
    So Home Depot sells flashing in a 4"x4"x8" pieces, are these ok to use? I would overlap about
    1/2 inch? I don't have the ability to run and crease longer pieces.That plastic dome is
    cracked, there is ...

  • Posted in thread: Install flashing after the fact... on 08-08-2016 at 12:44 PM
    Yes, there was no flashing that I could see, the tongue and grove went all the way down to the
    roof shingles, what was there before the newer roof was installed I cant say, but your solution
    makes the...

  • Posted in thread: Install flashing after the fact... on 08-08-2016 at 09:09 AM
    Pictures, the indoor pics shows sheet rock seams coming apart above skylight and below it which
    makes me think it isn't the skylight or it would only come apart next to or below the skylight,
    I think....

  • Posted in thread: Install flashing after the fact... on 07-27-2016 at 08:17 AM
    Yes Buds solution sounds really good, I wonder if I could cut 6" of the tongue and groove, take
    it out and insert the flashing then replace it. Be a tough job as I would have 48' of wall to
    cut.

  • Posted in thread: Install flashing after the fact... on 07-26-2016 at 08:05 AM
    I have no headwall flashing that I can see, the contractor installed the cedar siding all the
    way down to the shingle, the roof isn't that old and now I am getting water which seems to be
    coming from ...

  • Posted in thread: Anyone seen this skylight? on 06-04-2015 at 06:03 AM
    Haaa, nice video, thanks, but I hopefully have a company that will replicate that skylight
    dome, if it works out I will post it as it took forever to find it...

  • Posted in thread: Anyone seen this skylight? on 06-03-2015 at 07:06 AM
    So. the problem is, I have three of these, its size is a problem also, its 32.3/4 x 48.1/2 edge
    of flange to edge of flange, and its a double glaze, I'm thinking I will take the broken glaze
    off and j...

  • Posted in thread: Anyone seen this skylight? on 06-02-2015 at 01:09 PM
    I can't get anyone to replicate this cracked skylight and there is no identifying makings to
    say what company made it. If someone recognizes it, that would be so amazing..

  • Posted in thread: Flashing problem? on 05-14-2013 at 07:38 AM
    Hi All, My roofing guy a few years ago placed the asphalt roofing over the flashing. I beleive
    its supposed to go under the flashing, no? I have a leak, there is a 1/4 step down between the
    siding and...

  • Posted in thread: Oak floor buckling on 04-25-2012 at 07:03 AM
    I guess I will have to see what happens, if the floor gets to bad the tenant will have to be
    inconvenienced while I get it tiled, or the tenant could live with it until he moves out at
    which time I wi...

0 COMMENTS
POST A COMMENT


Newest Threads