Gift Premium Subscription To resurfacer

Join Date:


Last Activity:

10-26-2012 2:23 AM


  • commercial flooring contractor,decorative concrete contractor
  • cars, racing, designing with concrete
  • owner
  • Paul Spurlock
  • male
  • 1600 sq.ft. residential driveway with exposed aggregate. We are installing a roman slate running bond stamped concrete overlay with a slate textured border.

    2500 sq.ft Residential conversion of the 2nd floor of a horse barn. Concrete floor on wood. will include radiant floor heating, self leveling floor compound, micro topping, acid stains and dyes

    residential porch conversion to master bath room. 2" concrete overlay, micro topping, acid stain for floor, walls, wire mesh with bond coat, micro topping and Dye-N-Seal, jacuzzi, concrete tub surround, shower concrete seating.


  • Posted in thread: Remove Carpet Glue from Concrete on 10-27-2012 at 11:04 AM
    wet scrape the adhesive with a 4-5 inch razor blade scraper. Mechanically remove any
    contamination in the substrate by an approved method. Mechanically cleaning removes the
    contaminates and the concre...

  • Posted in thread: natural stone veneer wall on 09-27-2011 at 06:16 PM
    Hi Revid,Natural stone would be much to heavy to attach with wire mesh/scratch coat method.If
    you are referring to cultured stone,(man made lightweight stone) I would remove the Styrofoam
    and attach t...

  • Posted in thread: Cultured Stone veneer over cinder block fireplace on 09-25-2011 at 09:17 AM
    Starting from the top, pre-fit a section and build a ledge from lumber to support the stone.
    You can use morter instead of cement, apply to the vertical surface, back butter the stone,
    apply the stone...

  • Posted in thread: Remove Carpet Glue from Concrete on 10-27-2010 at 08:19 PM
    Your adhesive, if it's color is yellowish, it's a latex adhesive. You can remove most of this
    adhesive with a wet scrape method. Soak the floor with water, scrape the adhesive with a razor
    blade scrap...

  • Posted in thread: Am I using the right stuff? on 10-18-2010 at 05:00 PM
    from a pro, DON"T USE PRE-MIXed floor patch. When U patch just skim coat the seams and nail
    indents, be sure to feather out the edges of the patch. Use the least amount possible to obtain
    the desired ...

  • Posted in thread: Staining cinderblock sides of raised concrete slab patio on 10-18-2010 at 04:20 PM
    DebbieG, the quick wall product was originally designed as a waterproofing system, used in
    concrete block water tanks. U can apply an acrylic pigmented penetrating sealer to add color,
    it will not blo...

  • Posted in thread: Brick Wall Fireplace Questions on 10-18-2010 at 03:55 PM
    mjoe, I just quoted a similar project, it was an enclosed back porch on the back of a brick
    house. The brick was painted white. The client spent summers in South Africa where everything
    is build with ...

  • Posted in thread: Step Repair on 10-18-2010 at 03:10 PM
    The Red is a stucco mesh . I don't think I would recommend U use ready-mix cement, as it has
    large aggregate.Loews's and Home Depot have concrete dressing and concrete colors U can finish
    with a trowe...

  • Added a new Photo on 12/13/2009


Newest Threads