Last Activity:04-30-2010 3:25 PM
Posted in thread: Flagstone? on 04-30-2010 at 02:01 PM
Yes sir, that's the ones. Made of concrete. So I could cut the back with a angle grindermaybe
half way through then snap? I will give it a try. Thanks.
Posted in thread: Flagstone? on 04-30-2010 at 01:53 PM
Hope this is the right forum. I have some man made flagstone that my wife bought at Lowes. I
need o cut a coupkle pieces of it so she can place it where she needs it. I have seen some
shows showing ho...
Posted in thread: Gas Fireplace Blower on 01-12-2010 at 01:00 PM
Anyone, have any thoughts?
Posted in thread: Gas Fireplace Blower on 12-31-2009 at 12:14 PM
I am coming to the end of my basement remodel (hopefully). My wife and I want to put in a gas
fireplace. Stopped at the local gas supply company where I live and they had a few pre-fab
cabinets that g...
Posted in thread: Drywall - Power Sander on 02-19-2009 at 02:26 PM
After considering everyone's responses I decided to spend the money and rent the power sander
from HD. It was a Porter Cable. I couldn't be more pleased with the results and the time it
saved me. Sinc...
Posted in thread: Propane Gas Line Size on 01-14-2009 at 04:49 PM
Glennjanie, I feel like I owe you for saving my life. Thank you for the input on the licensed
install and how it does not dissipate. Actually I was only thinking that I could run the line
myself and g...
Posted in thread: Propane Gas Line Size on 01-14-2009 at 07:35 AM
During my basement remodel I have removed the existing line coming into the basement because I
want it moved to another wall. I have a 50' roll of 3/8" soft copper tubing (never used) given
to me. I a...
Posted in thread: Drywall - Power Sander on 01-13-2009 at 01:32 PM
Getting ready to start sanding my newly mudded walls and have plan to rent a power sander from
HD this weekend. I hope this will help to cut down on the time it will take me to sand my
Posted in thread: Painting Densarmor Frywall on 01-13-2009 at 01:27 PM
Just following up as promised. After testing a few areas I have decided to spend a little more
time and skim coat the entire basement. If not you are left with really smooth areas where you
mud the sc...
Posted in thread: Painting Densarmor Frywall on 12-30-2008 at 12:09 PM
I will followup when doen. I have some scrap laying around that I may play with before touching
my new walls. I have been working on and off on remodeling my basement for about a year now and
- One Word Game
- Popping tiles
- Musky smelling rugs
- Shower pan
- Transistion problem
- Carrier HVAC - Fan not turning
- Tub soft spots
- My cat is a moron, again
- Home improvement
- Re attaching flagstone in walkway
- What's that smell?
- Removing Shower Door/Frame Nails?
- Small hairline cracks in fiberglass balcony
- Tearing up ground level deck to deal with drainage issues at rear of house
- Granite Installed - Possible Issue?
- Floor Drain for AC Condensate Discharge