VIEW MY

serpentine5

Gift Premium Subscription To serpentine5

Join Date:

10-26-2010

Last Activity:

12-08-2010 11:30 PM

  • Chattanooga
  • Tn

LATEST ACTIVITY

  • Posted in thread: door question on 11-09-2010 at 10:06 PM
    cool, thanks

  • Posted in thread: Paint guns at HF on 11-08-2010 at 01:20 AM
    not a bad idea.... thanks..and no, havent checked prices... I figure I will find one that folks
    here will give a thumbs up on, and then work on getting one at a good price....

  • Posted in thread: Paint guns at HF on 11-08-2010 at 12:29 AM
    hat last one hasnt gotten back with me... how does this one sound?Paint Sprayer

  • Posted in thread: Paint guns at HF on 11-05-2010 at 09:55 PM
    How about this one? If it works.....Spray tech-Apex series-Model 1620Paint sprayer

  • Posted in thread: door question on 11-04-2010 at 10:10 PM
    say I wanted to build a little room inside of my garage, heat and cool this room, and I would
    want to put a 36in door on this room, would you recommend an exterior door or do they make
    insulated inter...

  • Posted in thread: Paint guns at HF on 11-04-2010 at 09:54 PM
    My compressor is rated 9cfm at 40 psi and 7cfm at 90 psi, i can run 90-125 psi constantly all
    day... I use it to run my air tools; grinders and chisels and such... so I am not worried about
    it running...

  • Posted in thread: holes in my foundation on 11-01-2010 at 12:28 AM
    Come spring, I am looking to get a backhoe in here and put in some french drains and attempt to
    bring in some clay to top everything off but thats down the road.... but right now I need to
    get these h...

  • Posted in thread: Pex and diverter valves on 10-31-2010 at 06:57 PM
    LOL, makes perfect sense. Thanks for explaining that Redwood.

  • Posted in thread: Running conduit from basement to the standalone garage on 10-31-2010 at 06:51 PM
    you might be right, the frost line here is only 18 inch, and like I said, everything is
    required to be below it.

  • Posted in thread: Putting in grout on 10-31-2010 at 06:48 PM
    cool, thank you much.The joints are less than 3/16 so I got the unsanded. I will probably get
    to work on this later this week. Have several other projects going on right now and dont want
    to start ano...

0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS