Sirrah

LATEST ACTIVITY

• Posted in thread: Water Softener drain on 05-13-2012 at 08:39 AM
  Sounds like you have a slow well. When you are running thru the water softner it keeps the
  gallons per hour below the well recharge rate but when you bypass you are moving more water
  quicker and the w...

• Posted in thread: Water Softener drain on 05-12-2012 at 11:13 AM
  Do this: Put the softener in service, go run the tub full blast, being careful to observe the
  flow. Then put it in bypass and do the same. Make sure the pump has built up and shut off. Then
  repeat the...

• Posted in thread: Water Softener drain on 05-12-2012 at 09:44 AM
  If you 100% sure you do not want the softner why keep messing with it? Just remove the lines
  from the softner and connect them back together so it does not go the softner at all any more.
  Hi & many th...

• Posted in thread: Water Softener drain on 05-11-2012 at 08:45 AM
  By turning a softener off and not bypassing it, the crud in your water can eventually plug the
  mineral and slow down your water flow. You said you re- primed the pump, so I assume it's a jet
  pump. Wha...

• Posted in thread: Water Softener drain on 05-09-2012 at 01:59 PM
  Hi All,Please forgive me if this is considered a hijack; but, I have a similar problem, it's
  just that it's 180 degrees opposite of what picolin originally posted. Everyone here seems to
  be so knowled...