Last Activity:03-07-2014 9:59 AM
Posted in thread: sealer for shower stall on 03-08-2014 at 02:39 PM
thanks, I was refering to grout sealing. already used redguard for the waterproofing membrane.
thanks for the responses. I will take your recommendation Mr.callmevilla
Posted in thread: sealer for shower stall on 03-07-2014 at 08:59 AM
hello all, can someone recommend a good sealer for a shower stall? thanks
Posted in thread: what are the bosses on 01-08-2014 at 03:14 PM
thanks for all the responses. I can sleep better at night, now that that's been clarified. why
couldn't they used plain english when describing the protective cone.
Posted in thread: what are the bosses on 01-02-2014 at 04:28 PM
ok, let's see if this works,
Posted in thread: v notch tool for dry wall? on 01-02-2014 at 04:01 PM
thanks for the responses, I decided to just cut individual pieces. just curious as to how the
installer did it. must have been a pro.
Posted in thread: v notch tool for dry wall? on 01-02-2014 at 09:09 AM
hello, is there such a thing as a v notch tool for cutting drywall? when I took down the
drywall in the bathroom overhang that had two 45 degree outside corners, noticed that the
installer had somehow...
Posted in thread: should mortar shower pan still be sandy on 01-01-2014 at 07:55 AM
happy new years all, I pored a mortar shower pan over a week ago and it seems to be very sandy.
I'm able to use the edge of my trowel and scrape material up. is this normal? I thought it
would harden ...
Posted in thread: what are the bosses on 01-01-2014 at 07:43 AM
Happy new years all, just installed a new delta shower body. on the plastic guide ring that is
used as a template to bring your finish wall to, there are instructions to "remove bosses
Posted in thread: soldering near wall on 12-16-2013 at 06:43 PM
hello all, I'm replacing the shower but the pipes are about 1/2 inch from the drywall. I have
two questions, how to cut the pipes and how to solder without burning the wall down. thanks
Posted in thread: adhesive for tile shower floor and what type of mortar on 12-05-2013 at 10:48 AM
took out the shower pan and discovered cement board in place. can I just pour the new stuff
onto this surface and do I still need to install metal lath in the preslope. thanks again.