SnellExperts
- Charlotte
- North Carolina

LATEST ACTIVITY
Posted in thread: Killing Mold on 01-19-2012 at 07:54 PM
Have you located the water source? If not that should be your first step. Completely dry that
area and make sure it can't get wet again and that will keep it from continuing to grow. You
can use produ...Posted in thread: Is this mold? on 01-19-2012 at 07:52 PM
Can you smell anything? If that was mold, then with that much of it you would most likely have
a very noticeable odor.Posted in thread: Whats The Price of Unleaded Gas Where You Are? on 01-19-2012 at 07:48 PM
I have to fill up once every 8 days or so, I'm thinking of hopping on lower prices when I see
them regardless of what the tank is on.I want either your gas tank or your driving schedule if
your only f...Posted in thread: Another mold thread... on 01-10-2012 at 12:32 PM
Make sure to get a hazmat suit as well. The mold spores can seep in through your skin, so any
direct contact could cause a reaction.Posted in thread: Moisture on insulation on 01-10-2012 at 12:28 PM
If the insulation has already gotten wet, I would consider removing it if you haven't already.
Beautiful spot for mold to start growing.Posted in thread: felt to wood? on 01-10-2012 at 12:27 PM
If it can hold that up, then it should be perfect for what I am looking to do with it. Thanks
for the info :)Posted in thread: Whats The Price of Unleaded Gas Where You Are? on 01-10-2012 at 12:27 PM
we are back in the range of 3.20 again...grumblingPosted in thread: Hi on 01-04-2012 at 09:20 PM
You have to put those things away? :)I never take mine out so I never have to worry about
putting them up :DPosted in thread: felt to wood? on 01-04-2012 at 09:19 PM
I have never heard of it. Where can you pick it up at? Would your local lowe's have them? I
tried carpenters glue...it seems to be holding so far. In all honesty though I'm thinking about
just refelti...Posted in thread: Whats The Price of Unleaded Gas Where You Are? on 01-04-2012 at 09:17 PM
saw it at 2.94, 2 days later it was 3.05....!!!!!!!!
Leave CommentNewest Threads
- Flashing problem?
- Lawnmower Question
- Size of intake vent?
- Need some help
- Hall Way Door - Is this load bearing?
- One Word Game
- Hallway header options where door is
- Carrier AC Outside Fan Will Not Turn ON
- Granite Installed - Possible Issue?
- Install Quarter Round when there is large gap underneath the baseboard?
- Req opinions on professionally completed drain repair.
- Pavers in an enclosed patio
- Driveway Resurfacing
- Shower faucet leaking when shower is on and replacing stem does not help
- Macs
- Kitchen flooring





Browse Members
Register