spitracer

LATEST ACTIVITY

• Posted in thread: Amana 90% Furnace Problem - kok328 help? on 02-08-2010 at 05:33 PM
  Well I did it, I called a tech in from the place that installed the furnace 12 years ago.......
  he was somewhat puzzled. Finally he said he needed to go up on the roof because he really felt
  that the ...

• Posted in thread: Amana 90% Furnace Problem - kok328 help? on 02-06-2010 at 09:18 AM
  I'm in Jackson.I talked with an Amana tech Friday and he gave me a new gasket for behind the
  inducer motor which I will install tonight. He also wants me to check the PVC pipe to make sure
  it hasn't s...

• Posted in thread: Amana 90% Furnace Problem - kok328 help? on 02-04-2010 at 07:11 PM
  It's official I'm beaten.I replaced the flame sensor and also talked with a tech. He determined
  that when they installed the furnace they failed to install the inducer blower drain so that it
  terminat...

• Posted in thread: Amana 90% Furnace Problem - kok328 help? on 02-03-2010 at 08:27 AM
  Status update for anyone thats interested.My temp fix of leaving the flame cover door off
  stopped working last night. I took the flame sensor out and sanded it with emmory(sp) cloth, I
  also removed th...

• Posted in thread: Amana 90% Furnace Problem - kok328 help? on 01-30-2010 at 08:26 PM
  The inducer assembly is a sealed unit, so I doubt anything is seriously amiss with the unit. I
  will pull the inducer tomorrow and use the shop vac on it. We did go outside and can hear the
  exhaust gas...

• Posted in thread: Amana 90% Furnace Problem - kok328 help? on 01-30-2010 at 01:14 PM
  KOK appreciate your comments!The furnace is working correctly as long as the burner box cover
  is off. It has run a day and half with no issues.I thought I would experiment to see if the
  intake stack w...

• Posted in thread: Amana 90% Furnace Problem - kok328 help? on 01-29-2010 at 12:46 PM
  Here my problem, we get back from vacation and the wife says whats that noise....what
  noise....the noise from the furnace...crap, I'll go find out.Get down to the furnace and the
  Inducer Blower Motor ...