- Posts 7
Last Activity:01-25-2009 8:31 PM
Posted in thread: Vintage Stove Question ! on 01-25-2009 at 09:38 PM
You should think about having the chrome pieces re-chromed, that is a classic stove. Nice.
Looks like a fourtys maybe early 50s model.
Posted in thread: Non-producing Ice Maker on 01-25-2009 at 09:24 PM
The easiest way is to just put some water in the ice mold and see if it kicks a batch out. If
it does but don't kick anymore out then water valve issues. If it don't then you need to maybe
Posted in thread: refig icemaker heat coil problem on 01-25-2009 at 09:14 PM
That heater melts the ice and it will blister yer finger. The fancy brain in that IM should
measure the capacitance change in the ice mold and shut the heater down though after the ice
has been releas...
Posted in thread: Dryer smells on 01-25-2009 at 09:08 PM
You may need to remove the filter housing and get the crayons out the bottom of it,give it a
rinse, yeah I have grandkids. :D
Posted in thread: What's wrong with my kegerator on 01-25-2009 at 09:03 PM
If the compressor is getting hot hot then the relay may be shot and the RCO410 would be the
perfect fix. Best way to tell is remove the relay on the compressor and check it.Give it a
shake and see if ...
Posted in thread: Dryer taking forever to dry clothes on 01-25-2009 at 08:58 PM
If you have a maytag/norge/crosley these are notorious for having the blower wheel loose on the
Posted in thread: Natural gas logs shut off soon after lighting on 01-25-2009 at 08:45 PM
I can tell you just what to do. The pilot safety feature has an ODS (oxygen depletion sensor)
that detects low oxygen in the room. The problem is dust and cobwebs get into the ODS chamber
and causes t...