VIEW MY

sweets

Member

Gift Premium Subscription To sweets

Join Date:

03-20-2007

Last Activity:

10-15-2012 7:36 PM

    ABOUT ME

  • home repair
  • stew

LATEST ACTIVITY

  • Posted in thread: Maytag Performa Stove not mantaing baking temp on 10-16-2012 at 02:23 AM
    until i posted here, i had no idea which part(s) could be defective and or tested, however i
    still dont know if its the control panel that's faulty, and how much it costs to replace:Maytag
    Performa Mo...

  • Posted in thread: Maytag Performa Stove not mantaing baking temp on 10-15-2012 at 07:36 PM
    I agree I need to test the parts with an ohm meter first and start replacing first the
    temperature probe and ignitor, if falls short on the ohm meter, however I think its the control
    panel since I can...

  • Posted in thread: Maytag Performa Stove not mantaing baking temp on 10-09-2012 at 08:05 PM
    its been helpful in as much as ive learned i have to 'ohm' the ignitors and temperature probe,
    that being said the rest were guesses, it could still be the control panel and i dont know how
    much that ...

  • Posted in thread: Maytag Performa Stove not mantaing baking temp on 10-09-2012 at 12:57 PM
    the problem is youre all guessing at the solution and with my money, the only response that
    made sense was to test the parts with an ohmmeter, it still may be the control panel thats
    faulty, how much ...

  • Posted in thread: Maytag Performa Stove not mantaing baking temp on 10-09-2012 at 05:40 AM
    "I'm not sure you're familiar with this stove, there are 2 ignitors, one for the broiler at the
    top of the compartment and the baking ignitor below the pan. So when I switch to "broil" the
    flame and i...

  • Posted in thread: Maytag Performa Stove not mantaing baking temp on 10-06-2012 at 08:12 AM
    I just wanted to make sure you were familiar with this model and that it has 2ignitors.Do the
    ignitors have get ohm meter reading ?

  • Posted in thread: Maytag Performa Stove not mantaing baking temp on 10-06-2012 at 04:32 AM
    "An amp meter reading would tell if the ignitor was weak....heating it up with the broil can
    help...so far it still -sounds- like a weak ignitor.It's the "it shut off and didn't come back
    on" that is ...

  • Posted in thread: Maytag Performa Stove not mantaing baking temp on 10-05-2012 at 01:39 PM
    This works every time:So whenever I see the set baking temperature drops, I switch to the oven
    setting via the clock, after the broiler flame is lit I wait several minutes, then switch back
    to bake, s...

  • Posted in thread: Maytag Performa Stove not mantaing baking temp on 10-04-2012 at 11:45 AM
    Yes i know youre correct and i should get the ohmeter/voltage meter and learn how to use
    itWhose the manufacturer of your 30 yr old furnace?I have a 27 yr old boiler and i'd sure like
    to get that manu...

  • Posted in thread: Maytag Performa Stove not mantaing baking temp on 10-04-2012 at 08:50 AM
    "Maybe, without testing we may not know for sure.....the sensor shuts off nothing nor does it
    turn on anything....temp sensor changes resistance to tell the control what is happening and
    the control t...

0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS