VIEW MY

swindmill

Gift Premium Subscription To swindmill

Join Date:

01-22-2010

Last Activity:

02-09-2016 7:55 PM

Likes Given: 1

14 Likes on 13 Posts 

    ABOUT ME

  • Home A/V equipment, cars
  • Jay W

LATEST ACTIVITY

  • Posted in thread: Venting over the range exhaust on 02-09-2016 at 12:11 PM
    The duct coming out of the OTR is 3.25"x10" I believe. I could take that up through the top of
    the cabinet and then convert to 6". That would seem to save space. And if needed, I can make a
    molding on...

  • Posted in thread: Venting over the range exhaust on 02-09-2016 at 11:40 AM
    I'm not on an outside wall, unfortunately. Straight up is the only way to get outside from the
    OTR location.

  • Posted in thread: Venting over the range exhaust on 02-09-2016 at 11:31 AM
    That's unfortunate, because I really need all the storage space I can get in this kitchen. But,
    I don't see an alternative. The recirculation method doesn't seem to be too helpful.

  • Posted in thread: Venting over the range exhaust on 02-09-2016 at 11:14 AM
    I was planning on 6". It seems the only downside to a bigger duct is less cabinet space, but I
    can live with that.

  • Posted in thread: Venting over the range exhaust on 02-09-2016 at 10:41 AM
    OK. I probably won't be moving nearly as much air with an OTR microwave. The pictured vent
    cover is what I had in mind.

  • Posted in thread: Venting over the range exhaust on 02-09-2016 at 09:08 AM
    It looks like, depending on the power rating of my OTR, I may not want to use the type of box
    cap I was considering. I probably need to find a proper supply store, as the big box stores
    seem to have a...

  • Posted in thread: Venting over the range exhaust on 02-08-2016 at 11:17 AM
    Thanks of the responses. The diagram is helpful. What type of roof cap do I use? I was thinking
    the same kind that is used for bathroom exhausts (aluminum box-looking piece with vents around
    it).

  • Posted in thread: Venting over the range exhaust on 02-08-2016 at 10:11 AM
    As part of my kitchen remodel, I'd like to go ahead and vent my OTR microwave outside. It is
    not an exterior wall, so I will being going straight up, or as straight as I can go depending
    on rafter loc...

  • Posted in thread: How to make 11" deep floating shelves sturdy on 02-04-2016 at 12:43 PM
    Put some glue in the hole and slip it on.If I measure for the holes on the back of the shelf
    just right so that they line up with the rods, this would work. That may be easier than coming
    up with some...

  • Posted in thread: How to make 11" deep floating shelves sturdy on 02-04-2016 at 12:35 PM
    I would certainly rather just make a bracket/support myself. I could mark the studs, cut a
    small patch out on each stud to make it visible, put the threaded rod in as you suggest, and
    then simply slid...

0 COMMENTS
POST A COMMENT